Home
/
Skateparks
/
The Best Skate Parks In Kansas City, Missouri 2023 (Updated)

The Best Skate Parks In Kansas City, Missouri

The Best Skate Parks In Kansas City, Missouri 2023 (Updated)

Kansas City touts over 200 parks. But what about skateparks, you ask? Well, the city also has a range of skateboarding parks. Some parks are privately owned, while others are public and DIY.

Among them, which are the best skate parks in Kansas City MO? In this guide, I will recommend the best options based on my experience and other users’ reviews.

Top-Rated Skate Parks in Kansas City

Below, I will discuss some of the best skate parks in Kansas City.

1. Bruce H. Scott Skate Plaza

Featuring multiple ledges and transition areas, this is a must-try skate park with a lot of fun. This skate park in Kansas City Mo is concrete and has been around since 2014. But what I really love about the facility is that it is secure.

Features

Pump track available for bikes, inline skates, and skateboards
Equipped with lots of street elements, including ledges, quarter pipes, rails, and bumps
Enough parking areas and wheelchair-accessible entrances

Restrictions

Glass containers, cans, and smoking are not permitted

Directions and Routes:

You can start from the Atkins-Johnson Farm and Museum. It will take you a 3-minute ride via NE Pleasant Valley Rd to the east. Take a right turn beside the City of Kansas City Community Recycle Center. Go a little inside, and the park will be on your right. // Skate Parks In Tampa, Florida //

Basic Information

Location: https://goo.gl/maps/brpHqRMGenbHyxKq7
Address: 6401 NE Pleasant Valley Rd, Kansas City, MO 64157, USA
Riding Type: Skateboarding, bikes
Skate Hours: Dawn to dusk
Cost fee: Free
Instructors: No
Number of Participants: Around 150 skaters at a time
Size: Around 38000 sq ft
Lights: Yes
Opened: 2014
Design: Unknown
Type of Skate Park: Recreational/neighborhood/Outdoor
Website: Not available

2. Harrison Street DIY Skate Park

This is one of the best DIY skate parks in Kansas City, featuring over 12,000 square feet of skating terrain. The park was built through the collaboration of the local skateboarding community and professional skaters starting in 2014. The park becomes the local treasure for skaters.

One of the best things about the park is that it is fun for people of all ages, including beginners and professionals.

Features

Concrete-made quarter and half pipes, smooth transitions, rollers, small standalone pool, many hips, and bowls.
Fitted with several benches for non-skaters.
Fun for use with skateboards, roller skate blades, longboards, and even bikes.

Restrictions

Open to the public every day.
An adult must accompany younger kids.

Directions and Routes:

You can start near the Missouri River BNSF Railway Bridge. It will take you a 6-minute drive via Broadway Blvd and W 6t St. Take a left turn onto Grand Blvd from W 6th St, and then a right turn onto E 5th St toward the park. // Skate Parks In Saint Petersburg, Florida //

Basic Information

Location: https://goo.gl/maps/k1SKWEhSqk3CtkRB7
Address: 401 Harrison St, Kansas City, MO 64106
Riding Type: Park skateboarding
Skate Hours: 24 hours
Cost fee: Free
Instructors: No
Number of Participants: Up to 70 skaters at a time
Size: 12,000 square feet
Lights: Yes
Opened: 2014
Design: Harrison park community DIY
Type of Skate Park: Recreational/neighborhood/DIY
Website: https://www.harrisonstreetdiy.com/

3. Holmes Park

Are you looking for a clean and well-maintained park for roll skating? I suggest you try out Holmes Park, which was established in 1943. The entire park is about 9 acres. In addition, it boasts nice play areas for kids, a decent skate surface, and a skating rink.

Features

Great hockey rinks for roller skating, roller hockey, and rollerblading.
Outfitted with bleachers, offering enough seating area.
Plenty of parking is available.

Restrictions

Only for use by roller skaters.
Dogs are allowed but must be leashed.

Directions and Routes

Situated on Holmes Road and East 70th Street near Oak Meyer Gardens. You can easily reach out to the park from the forest Hill & Calvary Cemetry via Troost Ave. Take a left onto E 6th St. The park will be on your right. // Skate Parks In Austin, Texas //

Basic Information

Location: https://goo.gl/maps/pdExG1r2E1UUPV118
Address: 725 E 70th Street, Kansas City, MO 64131
Riding Type: Roller skating
Skate Hours: Daily from 5 am to Midnight
Cost fee: Zero
Instructors: No
Number of participants: Up to a 100 skaters
Size: Around 16000 sq ft
Lights: No
Opened: 1943
Design: Dr. Hayes Richardson
Type of Skate Park: Recreational/Outdoor
Website: https://kcparks.org/places/holmes-park/

4. Penn Valley Skate Park

Established in 2006, the Penn Valley Skate Park is a fantastic park for experienced and beginner skaters. However, in 2012, the park was expanded, featuring 7,000 more square feet.

What I love about this skate park are its many obstacles, the excellent views, and the friendly environment.

Features

Graced with handrails, stairs, hips,
Ledges, euro gap, 10-inch-deep bowl, banks, and quarter pipes.
Fitted with a picnic table and a lovely water fountain.

Restrictions

For use by inline skaters and skateboarders only
No skating when the ground is wet
No drugs and alcohol
Must use safety gear like a top-quality helmet, knee pads, elbow pads, wrist guards, and hand gloves.

Directions and Routes:

It is located on the West side of Penn Valley Park and overlooks Downtown Kansas City. You can access it via 2900 Pennsylvania Avenue or the SW Trafficway via 31st Street. // Skate Parks In Phoenix, Arizona //

Basic Information

Location: https://goo.gl/maps/jnzgp5JsRSMTZQTu6
Address: 2900 Pennsylvania Avenue, Kansas City, MO 64108
Riding Type: Park skateboarding
Skate Hours: 24 hours
Cost fee: Free
Instructors: No
Number of participants: About 100 participants at a time
Size: 17,000 square feet
Lights: Yes
Opened: 2006
Design: Flow parks style
Type of Skate Park: Recreational
Website: Not available

5. Rosedale Skate Park

Looking to learn various tricks on a skateboard or bike? I highly recommend Rosedale SkatePark. The park is in a quiet neighborhood and has existed since 2012. The best part? Anyone can use this facility like the rest of the Kansas City skate parks in this guide.

Features

Sits on a 55-acre land with tennis courts, picnic tables, a parking lot, and golf courses.
Equipped with a restroom and running water.
Plenty of obstacles like curved rails, small spines, quarter pipes, ramps, and banks made of metal instead of concrete.

Restrictions

Only Skateboards, inline skates, and BMX bikes are allowed.
Children should skate under close supervision.

Directions and Routes:

Located within Rosedale Park, which you can access via the Rosedale Park Rd and Mission Road. It sits next to the Rosedale Disc Golf courses. // Skate Parks In Asheville, North Carolina //

Basic Information

Location: https://goo.gl/maps/rcvTeZVzy7ghsGch9
Address: Kansas City, KS 66103, United States
Riding Type: Skateboarding, scooter
Skate Hours: Dawn to dusk
Cost fee: Free
Instructors: No
The number of participants:
Size: 6000 sq ft
Lights: No
Opened: 2012
Design: Not available
Type of Skate Park: Neighborhood/Outdoor
Website: Not available

6. Studio Skate Supply

Big fun of indoor skateboarding? I suggest you visit this skate park in Kansas City mo that has existed since 2013. Besides offering skate park services, the facility also sells skateboards, skating apparel, equipment, and footwear.

Features

Outfitted with multiple ramps, ledges
Rails, quarter pipes, and spines
Offers skate school and skate camp for skaters of all skill levels and ages

Restrictions

No spectators are allowed inside the skating zone
Scooters, bikes, and inline skates are not allowed
Age under 18 must have to have legal guardian, and a helmet is required

Directions and Routes:

Located in the Muncie neighborhood of Kansas City along S 65th Street. You can access the facility via 6601 Speaker Rd from the Amazon MKC6 toward the southeast. // Skate Parks In Arlington, Texas //

Basic Information

Location: https://goo.gl/maps/7jQxtvTujByVyp9r8
Address: 230 S 65th St, Kansas City, KS 66111
Riding Type: Skateboarding
Skate Hours: Monday to Saturday: 12 pm to 7 pm, Sunday: 12 pm- 5 pm
Cost fee: $10
Instructors: Yes
Number of participants: Up to 30 skaters at a time
Size: 14500 sq ft
Lights: Yes
Opened: 2013
Design: Unknown
Type of Skate Park: Indoor
Contacts: contact@ridefourever.com or 913 326-2650
Website: https://www.studioskatesupply.com/

Conclusion

Although there are many skate parks in Kansas City mo, the above facilities are our top picks. This is because each park is strategically located for ease of access. Even better, these parks boast multiple obstacles for users of all ages and skill levels.

What Are The Important Factors While Purchasing the Best Longboard Bearings?

01. Size

8 mm bearings are commonly used. This size is perfect for the longboard bearing. You can choose the other sizes if they give you more comfort. But I will recommend you choose the 8mm bearing.

02. Type

You can get both the ball bearing and roller bearing around you. Most of the bearings are ball bearings. Ball bearings run faster and more smoothly than roller bearings. But ball bearings can not handle the load. In that case, the roller bearing performs well.

03. Durability

The bearing should be durable that can last a minimum of one year. You can increase its durability by cleaning regularly and running in dry places. Water and mud decrease their longevity quickly.

04. Performance

The performance of the bearings is the most important fact. If your longboard bearings are rough and run with less spin that will not satisfy you. Also, a smooth and fast bearing with noise will annoy you. So, check before buying if there is any defect in performance.

05. Precision

Precision is the exactness or correctness of the tolerance. The American manufacturers association uses ABEC to define precision. When the precision increases, the permissible range decreases. Precision is independent of bearing clearance. The higher the ABEC number, the tighter the bearing will be. Higher precision helps to move more smoothly and increase efficiency.

06. Lubrication Compatibility

Lubrication is a must before riding on your longboard. To convert your slow bearings into fast longboard bearings you have to clean them regularly and lubricate them. It will give a fast spinning movement.

07. ABEC rating

While buying bearings, you need to check whether it is ABEC-rated longboard bearings or not. ABEC rating stands for dimension. It only rates tolerances. Some ABEC classes are 1, 3, 5, 7, 9, and 11. ABEC rating 9 is tighter than ABEC rating 1. The more the ABEC rating, the more the precision will be.

08. Engraved seals

Engraved seals prevent entering dust and other material inside. It also holds the lubricant inside and prevents friction. Most of the brands use rubber material for easy cleaning and to prevent the entry of water inside. While buying, check all the seals properly.

09. Price

Price is a big factor when buying anything. If you get a bearing with better quality at less price, then that will attract you the most. People mainly buy this type of bearings the most. Also, you should not follow the misconception that more expensive things mean better. Most of the famous brands are budget-friendly and careful about quality.

10. Brand reputation

While buying high-quality longboard bearings, people follow reputed brands. If the reputation is good then people do not hesitate to buy from the brand.

11. Warranty/Guarantee

If the brand provides you with a warranty or guarantee, that will be a plus point for you. You can repair the bearings if any problem arises at no cost within the given time. Also, the refund policy is beneficial for the buyers. You can change the defective set or can return the set with a full refund.

FAQs About Longboard Bearings

These are some commonly asked questions by people about the best bearings for longboards.

Is it worth it to invest in more expensive longboard bearings?

No, it is not worth it to invest in more expensive longboard bearings. More expensive is not equal to best quality. You can get a high-quality bearing within a suitable budget.

How do I know if my longboard bearings need to be replaced?

If the bearings start producing noise and are rough to run after cleaning, then you need to replace your longboard bearings. Also, the bearing will not spin if it is worn out.

What is the difference between ceramic and steel bearings for longboards?

The difference between ceramic and steel bearings for Longboards is durability. Ceramic bearings are more durable, smooth, and corrosion-resistant. At the same time, steel bearings are easily damaged by corrosive substances and are less durable than ceramic ones.

Can I lubricate my longboard bearings myself, or do I need to take them to a professional?

You can lubricate your longboard bearings yourself. )r if you have no previous experience, then you need to take them to a professional. But choose the right lubricant for the bearings.

Can I mix and match different brands of bearings on my longboard?

You should not mix and match different brands of bearings on your longboard as they are different from each other in size, shape, durability, and performance. Mixing different brands is unable to balance your movement.

Can I use the same bearings for both my longboard and my skateboard?

Yes, you can use the same bearing for both your longboard and your skateboard. The only difference appears in the case of wheel size. Otherwise, there is no difference between the bearings. But you should be careful about the dimension of the spacer.

Conclusion

Now it will be easy for you to choose the best Bearings for Longboards. You can compare the bearings and choose according to your comfort. I will recommend you choose the bearings which are performing well and have good customer service. If you still can not choose a perfect one then you can select it by brand reputation.

Also, choosing the brands which are giving warranty is the safest to pick. You can get these ten best bearings within an affordable range. Do not choose the bearings which are rated below ABEC 3. Below 3 ABEC-rated bearings have less tolerance.

About the author

This is Kyle Spinks from Butte MT, USA. A skateboarding expert and lover since 2019. skateupdates.com is my blog where I share my skateboarding life experience daily or weekly. If you're a beginner skater, I'll advise you to follow my blog daily.

Leave a Reply

Success message!

Warning message!

Error message!