• Home
  • /
  • Skateparks
  • /
  • Top 7 Best Skate Parks In Arlington, Texas (All Details)
Top 7 Best Skate Parks In Arlington, Texas (All Details)

Top 7 Best Skate Parks In Arlington, Texas (All Details)

Do you live in Arlington, Texas, and looking for places where you or the kids could have fun? I can confirm that many skateparks are available in this part of Texas.

However, some are better maintained than others. In addition, some skateparks have lights and restrooms, but others don’t. Therefore, finding a park that meets all your needs can take time and effort.

Below, I will discuss the best skate parks in Arlington TX that are worth checking out.

List of the Best Skate Parks in Arlington, TX

Now let’s check out our top skate parks in Arlington, including their features, location, and restrictions.

01. Arlington Skatium

Looking for a spacious indoor skate park in Texas? I suggest checking out the Arlington Skatium. This facility was established in 1995 and is one of the largest in Texas, serving the Fort Worth and Dallas communities.

 Arlington Skatium


  • Boasts a maple wood skating floor and a roller-skating rink.
  • Roller blades and inline skates are available for rental.
  • Plenty of food, socks, quad skates, and seating areas.


  • You cannot bring beverages and food from outside.
  • Skateboards and hoverboards are not allowed.

Directions and Routes:

Located in Southeast Arlington along South Cooper Street near the ASI Gymnastics.

Static Information

Address:5515 S Cooper St, Arlington, TX 76017
Contacts:Support@skatium.com /817 784-6222
Riding Type:Freestyle skating, roller skating, skateboard
Skate Hours:Sunday: 1 pm to 6 pm,
Tuesday: 1 pm to 4 pm,
Wednesday: 6:30 pm to 8:30 pm,
Thursday: 1 pm to 9 pm,
Friday: 1 pm to 4 pm and 7 pm to 11 pm,
Saturday: 12 pm to 6 am
Cost fee:$12 + $5 for trainers
Participants:Up to 50 participants
Size:30,000 sq. ft
Type of Skate Park:Indoor

02. Burl L. Wilkes Park

This is a relatively smaller skate park compared to the Arlington Skatium. Even so, I recommend it because of its many amenities, including a skatepark, playground, and picnic area. Not to mention, the park has been around since 2011 and is still in good condition.


  • Few obstacles, including two rails, stairs, ledges, and high-quality ramps
  • Park is 3 acres big or 130,680 square feet
  • Lots of slides, seating areas, and practice fields


  • Younger kids require close supervision by an adult
  • Best for kids over 5 years of age

Directions and Routes:

Situated on the East Arlington between Hillcrest Dr, Reever St, and Marilyn Lane. // Skate Parks In Tampa, Florida //

Static Information

Address:1300 Hillcrest Dr, Arlington, TX 76010
Riding Type:Park skateboarding
Skate Hours:5 am – 10 pm
Cost fee:Zero
Participants:3 to 4 skaters at a time
Size:The entire park area is 3 acres
Type of Skate Park:Recreational/neighborhood

03. Cody Rocamontes Memorial Skatepark

Here is another excellent little skate park for skaters of all levels. It was built in memory of Cody David Rocamontes, a 15-year-old boy that died on his way to skate. However, the construction of this park ended in 2013. I recommend this facility because it has friendly people and is well-kept.

Cody Rocamontes Memorial Skatepark


  • 5,400 square feet in size with BMX and skating obstacles.
  • Fitted with a flat bar, a hipped bank, some rails, and a small quarter pipe.
  • Plenty of parking space.


Directions and Routes:

Located at the heart of Randol Mill Park along Randol Mill Park Rd. // Skate Parks In Phoenix, Arizona //

Static Information

Address:1901 W Randol Mill Rd, Arlington, TX 76012
Riding Type:Park skateboarding
Skate Hours:5 am – 10 pm daily
Cost fee:Free
Participants:Around 30 at a time
Size:5, 400 sq. ft
Design:Cody Rocamontes Inc (A professional skatepark builder)
Type of Skate Park:Recreational

04. ICE at The Parks

Interested in trying out ice skating? I bet you will love it here at the ICE at The Parks. This facility was founded in 2002 and offers public skate sessions, hockey programs, birthday parties, and ice-skating lessons.


  • The rink has stands if you want to take a break.
  • Locker rooms, seating area, parking garage, and restrooms are available.


  • Kids below 18 years must be accompanied by an adult after 2 pm.
  • Speed skating is not permitted during public sessions.

Directions and Routes:

Situated inside The Parks Mall At Arlington at the first level near Dick’s Sporting Goods. The mall is situated at South Cooper Street and Interstate 20 in South Arlington. // Skate Parks In Saint Petersburg, Florida //

Static Information

Address:3815 S Cooper Street, Arlington, TX 76015
Contacts:(817) 419-0095
Riding Type:Hockey and speed skating, Ice rolling
Skate Hours:11 am-5 pm from Monday to Wednesday
11 am-8 pm on Thursday
11 am-9 pm on Friday
12-7 pm on Saturday
1-6:30 pm on Sunday
Cost fee:Free for kids under 5 years, $14 for adults, and $11 for youths.
Participants:Groups of 10 or more
Design:Indoor ice-skating rink
Type of Skate Park:Recreational/Indoor

05. Randol Mill Park

Randol Mill Park is an excellent place with many amenities, like basketball courts and a playground. The park has been in existence since 1933 and also boasts a small skate park with several obstacles. However, I love that the park has since been revamped and looks as good as new.

 Randol Mill Park


  • Plenty of baseball fields, picnic spots, parking, grills, water ponds, and tennis courts
  • Well-lit at night
  • Skatepark has several rails, a ledge, and smooth transition areas


  • Kids below 5 years must be accompanied by an adult.
  • The aquatic center is not free to access except for kids below 1 year.

Directions and Routes:

Located in West Arlington and accessible via the Randol Mill Park Road, just like the Cody Rocamontes Memorial Skatepark.

Static Information

Address:1901 W Randol Mill Rd, Arlington, TX 76012
Contacts:+817 459 5474 (City Park Council)
Riding Type:Park skateboarding
Skate Hours:5 am to 10 pm daily
Cost fee:Zero for skateboarding
Size:39000 sq ft
Type of Skate Park:Recreational/Outdoor

06. Vandergriff Skatepark

Like other Arlington skateparks in this review, I recommend the Vandergriff Skatepark because it has something for everyone. There is a skateboard area, a playground for kids, baseball fields, a picnic area, and more. The park’s first phase was completed in 2014, but the second phase is yet to begin.


  • Outfitted with ledges, rails, banks, stairs, transitional snake run, flow bowl, and other street features
  • Walking and running trails are available
  • Includes public restrooms, picnic tables, and benches


  • Bikes, scooters, longboards, skates, and blades are allowed
  • Closes at midnight

Directions and Routes:

Situated within the Vandergriff Park, East Arlington, near the Bob Duncan Center and along South Center Street Arlington. // Skate Parks In Austin, Texas //

Static Information

Address:2800 South Center St, Arlington, TX 76014
Contacts:817-459-5473 (Arlington Parks and Recreation Department)
Riding Type:Park skateboarding, roller skating, scooter, bikes, etc.
Skate Hours:6 am – 12 am daily
Cost fee:Free
Participants:Up to 120 at a time
Size:21,000 square feet
Design:Newline Skateparks
Type of Skate Park:Recreational/Outdoor

07. Webb Community Skate Park

Although smaller than most skateparks in Arlington, the Webb Community Skate Park features many obstacles. The skate park is relatively new, having been established in 2019. Nevertheless, whether you are a beginner or a pro skater, I recommend this place.

Webb Community Skate Park Texas


  • Plenty of obstacles like rails, manual pad, A-frame ledge, banks, quarter pipe, mini ramp, center spine, and roll-overs
  • Restrooms, pavilion with seats, picnic area, and playground available.
  • Measures about 4,000 square feet big.


  • IGraffiti, glass containers
  • Loud music
  • Food and drinks on the skating surface
  • Abusing language
  • No leaving trash around the park.

Directions and Routes:

Located within the Webb Community Park in Southeast Arlington along the Mansfield Webb Rd and Bowman Branch Linear Trail. // Skate Parks In Kansas City, Missouri //

Static Information

Address:1100 Mansfield Webb Road, Arlington, Texas 76002
Riding Type:Skateboarding, BMX
Skate Hours:24 hours
Cost fee:Free
Participants:Maximum 10 people at a time
Size:4,500 sq. ft
Design/Build:SPA Skateparks
Type of Skate Park:Recreational/Outdoor


Whether you are a beginner or an experienced skater, the above skate parks in Arlington TX are the best. These parks stand out because apart from allowing you to skate, they have other amenities like playgrounds and baseball courts. So, kids of all ages can visit the skate parks.

What Are The Important Factors While Purchasing the Best Longboard Bearings?

01. Size

8 mm bearings are commonly used. This size is perfect for the longboard bearing. You can choose the other sizes if they give you more comfort. But I will recommend you choose the 8mm bearing.

02. Type

You can get both the ball bearing and roller bearing around you. Most of the bearings are ball bearings. Ball bearings run faster and more smoothly than roller bearings. But ball bearings can not handle the load. In that case, the roller bearing performs well.

03. Durability

The bearing should be durable that can last a minimum of one year. You can increase its durability by cleaning regularly and running in dry places. Water and mud decrease their longevity quickly.

04. Performance

The performance of the bearings is the most important fact. If your longboard bearings are rough and run with less spin that will not satisfy you. Also, a smooth and fast bearing with noise will annoy you. So, check before buying if there is any defect in performance.

05. Precision

Precision is the exactness or correctness of the tolerance. The American manufacturers association uses ABEC to define precision. When the precision increases, the permissible range decreases. Precision is independent of bearing clearance. The higher the ABEC number, the tighter the bearing will be. Higher precision helps to move more smoothly and increase efficiency.

06. Lubrication Compatibility

Lubrication is a must before riding on your longboard. To convert your slow bearings into fast longboard bearings you have to clean them regularly and lubricate them. It will give a fast spinning movement.

07. ABEC rating

While buying bearings, you need to check whether it is ABEC-rated longboard bearings or not. ABEC rating stands for dimension. It only rates tolerances. Some ABEC classes are 1, 3, 5, 7, 9, and 11. ABEC rating 9 is tighter than ABEC rating 1. The more the ABEC rating, the more the precision will be.

08. Engraved seals

Engraved seals prevent entering dust and other material inside. It also holds the lubricant inside and prevents friction. Most of the brands use rubber material for easy cleaning and to prevent the entry of water inside. While buying, check all the seals properly.

09. Price

Price is a big factor when buying anything. If you get a bearing with better quality at less price, then that will attract you the most. People mainly buy this type of bearings the most. Also, you should not follow the misconception that more expensive things mean better. Most of the famous brands are budget-friendly and careful about quality.

10. Brand reputation

While buying high-quality longboard bearings, people follow reputed brands. If the reputation is good then people do not hesitate to buy from the brand.

11. Warranty/Guarantee

If the brand provides you with a warranty or guarantee, that will be a plus point for you. You can repair the bearings if any problem arises at no cost within the given time. Also, the refund policy is beneficial for the buyers. You can change the defective set or can return the set with a full refund.

FAQs About Longboard Bearings

These are some commonly asked questions by people about the best bearings for longboards.

Is it worth it to invest in more expensive longboard bearings?

No, it is not worth it to invest in more expensive longboard bearings. More expensive is not equal to best quality. You can get a high-quality bearing within a suitable budget.

How do I know if my longboard bearings need to be replaced?

If the bearings start producing noise and are rough to run after cleaning, then you need to replace your longboard bearings. Also, the bearing will not spin if it is worn out.

What is the difference between ceramic and steel bearings for longboards?

The difference between ceramic and steel bearings for Longboards is durability. Ceramic bearings are more durable, smooth, and corrosion-resistant. At the same time, steel bearings are easily damaged by corrosive substances and are less durable than ceramic ones.

Can I lubricate my longboard bearings myself, or do I need to take them to a professional?

You can lubricate your longboard bearings yourself. )r if you have no previous experience, then you need to take them to a professional. But choose the right lubricant for the bearings.

Can I mix and match different brands of bearings on my longboard?

You should not mix and match different brands of bearings on your longboard as they are different from each other in size, shape, durability, and performance. Mixing different brands is unable to balance your movement.

Can I use the same bearings for both my longboard and my skateboard?

Yes, you can use the same bearing for both your longboard and your skateboard. The only difference appears in the case of wheel size. Otherwise, there is no difference between the bearings. But you should be careful about the dimension of the spacer.


Now it will be easy for you to choose the best Bearings for Longboards. You can compare the bearings and choose according to your comfort. I will recommend you choose the bearings which are performing well and have good customer service. If you still can not choose a perfect one then you can select it by brand reputation.

Also, choosing the brands which are giving warranty is the safest to pick. You can get these ten best bearings within an affordable range. Do not choose the bearings which are rated below ABEC 3. Below 3 ABEC-rated bearings have less tolerance.

About the author

This is Kyle Spinks from Butte MT, USA. A skateboarding expert and lover since 2019. skateupdates.com is my blog where I share my skateboarding life experience daily or weekly. If you're a beginner skater, I'll advise you to follow my blog daily.

Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
Success message!
Warning message!
Error message!