7 Best Motors for Electric Skateboards 2024: Buying Guide

Skateboarding is a lot of fun! Now imagine if you can go faster using motors and without propulsion, sounds so much more fun, right? And you can achieve that in your own home! Yup, you heard that right, no purchasing or wasting of money, you just make an electric skateboard.

Now, to do that, you need a certain variety of tools and utensils. And one of them is a motor. And that is what we have in this article.

Here we feature the best motors for electric skateboards, and we can assure you that you will have a lot of fun if you install them on your board. Moreover, you will find various other assistive information that you can use.

Anyways, enough beating around the bush, let us get to the good parts!

Our Top 7 Best Electric Skateboard Motors

When we said we had the best products in the market, we were not kidding, and once you finish this section, you will get the products that you have been wanting for so long.

01. Hobbysky 6374 170KV-190KV Brushless Outrunner Motor

Let us face it, the cost of an efficient and high-performance motor might set you back quite a bit. Nonetheless, if the price is a big issue and you do not want to compromise on the performance, then this is the perfect option for you in the market as it’s regarded as the best motor for an electric skateboard.

The motor outputs an RPM per volt, which is around 170 kV or 190 kV. Thus, we assure you that with the power and speed you are looking for in your DIY skateboard, this bad boy will be able to give you with relative ease.

If you want a more proper rating of the speed and power, then the motor can deliver you a torque of 3.74 Nm and 36kW. Plus, the voltage and current required to run the contraption are highly low.

No need for heavy batteries 

In short, you do not need those heavy batteries to run this motor. Furthermore, the shaft size of the motor is 8mm and 11mm, which is quite a standard size for the wheel of skateboards.

Apart from all the marvelous electronic attributes that this masterpiece has to offer, it comes with some noteworthy ergonomic perks.

One of them is its construction. 

It is manufactured from an extremely durable and long-lasting material that also makes it impervious to dust and water. Hence, you can use it in all conditions.

Lastly, due to its light and compact dimensions, you should be able to set it up swiftly onto your skateboard.

Pros

• Outputs a staggering power and torque
• Has a sturdy and reliable construction
• Resists dust and rust, and contains a water-proof exterior
• Quite an affordable motor
• Standard shaft size allows you to attach anything you want to the motor

Cons

• Standard shaft size allows you to attach anything you want to the motor

02. Flipsky HGLtech Belt Brush Motor 6374 190KV 3250W

Are you looking for a motor that is more than capable of running all sorts of small-time transports? Well, if your answer is yes, then you can stop looking as we have the perfect product for you right here in our article.

Flipsky beast outputs the maximum torque

The motor is a gem when it comes to efficiency. The manufacturer 6374 HGLtech made sure that this beast outputs the maximum torque as efficiently as possible. And in terms of power, the name beast is the ideal title for this one. The motor can output a staggering torque of 8Nm, which is sufficient for all sorts of usage.

Besides, it is installed with a high-power output of around 3250W. This could very much run on almost any kind of e-transport. Furthermore, the 8mm shaft is a standard diameter for anything to be attached to the motor.

A lightweight motor

The skateboard is quite light. When that is coupled with compact dimensions, you can station the product very easily. And the build of the item is quite sturdy.

It has a dust-proof and water-proof exterior, which makes it an ideal motor for all types of environments. Furthermore, even the insides of the motor are quite robust.

What are the stators made of?

The stators are made from steel and contain high 12AWG strand wires with gold coating. If you want us to summarize the entire article, then this is a highly efficient motor that can withstand a max peak amperage of 70A. It will also provide you with outstanding performance for a long time. Get ready to have the time of your life!

Pros

• Offers a sturdy and durable surface
• You will be facing no issues during installing the device
• The motor has quite a mighty power output that is more than enough to operate all devices
• Can be used for almost all sorts of projects

Cons

• The packaging of the motor is not that good or impressive

03. iWONDER Brushless Belt Electric Skateboard Motor

The iWONDER Electric Skateboard Motor is an excellent choice if you want to upgrade your board. This extremely powerful motor will allow you to enjoy your skateboarding experience more than ever.

Can you ride on rough surfaces?

You can ride on rough surfaces such as grass or gravel without having to worry about damaging the motor because it is waterproof; this means that if there is any water present in your environment when riding, then no problems will arise as long as you clean up after yourself immediately after use.

High-quality aluminum alloy

The iWONDER Brushless Belt Motor is made with a high-quality aluminum alloy. It has a power capacity of 800 watts. The motor also comes with a belt drive, allowing the user to ride quietly. The belt drive makes it easier for the motor to run smoothly and quietly. The motor can be used with longboards, skateboards, scooters, bicycles, and other similar vehicles.

Adjustable switch and Maximum speed

The motor has an adjustable switch that allows you to change the speed and voltage settings quickly and easily. It can reach up to 8400 RPMs at maximum speed, allowing you to climb hills easily!

This motor weighs 320 grams and measures 6.6 x 4 x 1 inch (LxWxH). It also comes with two screws so that you can attach it to your skateboard or longboard easily!

Pros:

• This motor is made of high-quality materials and is durable.
• The motor’s gears are nylon and aluminum, making it lightweight and easy to use.
• It has an adjustable range of motion that allows users to find the right speed for their needs.
• The brushless design eliminates friction and provides smooth operation with no maintenance required.
• It comes with a 3-year warranty from the manufacturer that covers any defects in workmanship or material and damage caused by excessive wear or misuse (e.g., failure to follow instructions).

Cons:

• The only con of this product is that it’s quite heavy and not very portable, so you may need an electric skateboard to carry it easily.

04. Alomejor Brushless Electric Skateboard Motor (6354 270KV)

The Alomejor Brushless Motor Controller is a high-quality motor with lots of power. It has a voltage of 42 Volts, a horsepower of 2300 Watts, and can be used to power electric bicycles and skateboards. It is also made from aluminum, which makes it very durable and the controller allows you to control the motor’s speed. This means you can control your ride and how fast or slow it goes.

ESC (Electronic Speed Controller)

The Alomejor Brushless Motor 6354 270KV comes with its own ESC (Electronic Speed Controller). This helps to regulate how fast or slow your motor runs and gives you more power and better control over your ride.

Lasting time and speeds

The controller has been tested to last up to 30,000 hours, so you don’t have to worry about replacing it anytime soon. It also has adjustable speeds from 0-30mph or 0-20km/h, depending on the type of board you’re using it on.

High-performance Motor

In addition to its high performance, this product has an excellent appearance, design, and quality. Moreover, it has a beautiful appearance with many colors available for your selection if you need one for your longboard or skateboard!

Pros:

• The price is reasonable for such a high-quality product.
• It is easy to install, and it works perfectly.
• The motor controller has a strong power supply so that it can work on my electric bike easily.
• The controller is made of aluminum, making it durable and long-lasting.

Cons:

• This motor controller only supports 24V and 36V batteries, so if you want to use it on your battery pack, you will have to modify the circuit board or buy a new one that can support 42V batteries.

05. The PROMOTOR Hub Motors Drive Kit

PROMOTOR Hub Motors Drive Kit is a great option for anyone looking for an alternative to the traditional skateboard. This motor kit is designed to fit all types of longboards, including those with drop-through decks and kicktails.

Motors’ power and range

The motor comes with a 36 Volt battery pack that provides enough power for your board to travel long distances without needing any charging stops. It also has a 150 Watt output, so you can get from point A to point B fairly quickly without worrying about running out of battery life while riding.

The kit is available in two color options: black or white. Each kit comes with two motors rated at 150 watts, giving your board an impressive top speed of nearly 20 mph.

It’s made of PU leather material

The motors are made from PU leather material, making them very durable, lightweight, and quiet compared with other motors on the market today. They also feature a high-torque design that allows them to operate at higher speeds than usual while maintaining control over your board.

The PROMOTOR Hub Motors Drive Kit is an excellent choice to upgrade your current setup or get your first electric skateboard set up!

There are pros and cons to the PROMOTOR Hub Motors Drive Kit for Electronic Skateboard Longboard 90MM 6364 Motor Wheel.

Pros:

• Lightweight: This kit is lightweight and easy to use. It’s ideal for those who want to upgrade their skateboards and longboards without much effort.
• Durable: The kit is made of high-quality materials that ensure durability, so you don’t have to worry about breaking down after a few months of use.
• Easy to install and use: One of the best things about this kit is that you don’t need any skills or experience as an electrician to install it on your board and start using it immediately.

Cons:

• Pricey: The price of this kit is high compared to other similar products on the market.
• No other parts: It’s also important to note that this kit does not come with anything other than the motor itself. You will need to purchase everything else separately, including wires, connectors, and batteries, for your board to run smoothly (these can be expensive).

06. The HGLTECH BLDC Electric Skateboard Sensored Motor

The HGLTECH BLDC Electric Skateboard Motor is a great product to use. It has an efficient design, and it is made of quality materials. The battery pack is also high-quality, which makes it last longer. This motor can be used in many applications, including electric skateboards, electric bikes, electric scooters, and other vehicles.

Motors power, weight, and size

The motor has a total power of 3250 Watts and uses a 12V battery pack that can hold up to 10Ah of electricity. This product has two main components: the motor itself and the battery pack. The motor has a diameter of 2 inches and weighs around 1.9 pounds. It comes with an aluminum heat sink that helps dissipate heat away from the motor itself so that it doesn’t get too hot when using it.

On the other hand, the battery pack is much smaller than the motor itself but still provides enough power for your vehicle or whatever you may need.

HGLTECH brings the latest technology.

Belt-driven direct-drive electric skateboard motor is the latest technology in the industry, and HGLTECH has developed it. This motor is equipped with a belt drive system that is more efficient, reliable, and powerful than other motors.

The motor adopts the belt drive system to reduce friction and improve efficiency. It also has a powerful brushless DC motor that can produce up to 30% more power than traditional motors.

Pros:

• High-performance, low-voltage motor.
• Brushless motor with built-in sensors and active braking system.
• Fits all electric skateboards, eBikes, and scooters.
• It can be used in both forward and reverse directions.

Cons:

• Specialized Use: This product is designed specifically for electric skateboards and e-scooters, so if you are not familiar with these two types of products, it may be difficult to use this motor effectively.

07. Flipsky BLDC Brush-less Belt 6354 190KV 2450W

When you want the best motors for your DIY skateboards, roller skates, or anything similar, then Flipsky’s products are the ones you should opt for, especially the BLDC 6354.

Staggering power of approximately

The motor features a staggering power of approximately 7Nm, which provides you with a rough RPM of 3342. So, if you want to speed from your skateboard, then this is a great option.

Next, the longevity and endurance that this motor is off the charts! Its exterior is dust-proof and waterproof. Moreover, the motor is a top-notch choice if you are in search of something that certifies A-grade efficiency and power.

Components are first-class

Each of the components inside the motor was carefully placed inside to give you efficiency. And each of the components is first-class so you can expect the best performance from this one.

Now, when it comes to installing the device into something, we can confidently say that you will feel like it’s such an offhand task. There are no complicated bolts or procedures that you have to follow when you want to mount the device onto something.

Standard shaft size

More so, due to its standard shaft size, using the device in a mode of transport is a very effortless task. Moving on, every wire of the machine has a certain purpose. All the adequate info about this is written quite clearly in the instruction manual.

However, just for your convenience, this table should be of a lot of help:

• Red = 5v
• Blue = A
• Yellow = C
• Green = B
• Black = GND

Unlike all the motors that we have suggested here, this one makes much less noise. Thus, we guarantee that you will be having a pleasant and fun ride.

Pros

• Highly productive and outputs a sizeable power
• Easy to use and install
• Contains dust-proof and water-proof exterior
• Grants marvelous efficiency

Cons

• The product is a tad bit expensive

Factors to Consider When Purchasing the Best Motors for Electric Skateboard

You may have noticed many options if you’re looking for a new motor for your electric skateboard. Electric skateboard motors come in many shapes and sizes, and deciding which is suitable for your board can be challenging. To make things easier on yourself, we’ve put together an electric skateboard motor buying guide to help you make the best choice when shopping for motors.

01. Consider the Types

When it comes to motors for electric skateboards, there are several types to choose from. Each has its benefits and drawbacks, so choosing the suitable engine for your needs will depend on your personal preferences and budget.

Are the two different types of motors used in electric skateboards, and what do they mean for you?

Type One: Belt-driven Motors

The first option is a belt-driven motor system that works by attaching a belt to the wheel and then attaching it to the motor. The straps are connected to gears that move in and out as you ride, which spins your wheels. This can be an effective way to get power for your skateboard, but there are some drawbacks.

Belt-driven motors aren’t very efficient because they have more moving parts than other motors. They also require more maintenance because you must keep replacing them when they wear out.

Type Two: Hub Motors

Hub motors use either direct drive or geared drive to generate power. Due to their complexity, they tend to be more expensive than belt drives, but they offer better performance and a longer lifespan since fewer moving parts are involved.

Hub motors can support larger wheels without issues and are generally more powerful than belt drives. However, some hubless designs can match or exceed the torque provided by a belt-driven system if equipped with high-quality bearings and other components that ensure smooth operation over time.

02. Charging Life

The first thing you should look at is how long the battery takes to charge and how long it lasts on a charge. You don’t want to constantly keep track of your battery level or worry about running out of juice halfway through your commute.

Find out how much time your board’s battery takes to recharge when drained completely, and then consider if that fits into your daily routine (or if you’ll need access to an outlet).

03. Motors’ Performance

When choosing the best motor for your electric skateboard, it’s essential to consider the engine’s performance. Skateboard performance refers to the maximum torque and speeds a motor can produce.

The higher the performance rating, the faster your board will go. The power a motor produces is measured in watts (W). For example, an 800W motor can produce up to 800W power at its peak.

Most boards come with motors that are rated between 500W and 1000W. This means they can reach speeds of around 25 mph (40 kph) or more on flat ground. Higher-performance motors can reach speeds up to 40 mph (64 kph) but may be too fast for beginners or those who don’t want to go crazy on their first ride!

04. Material Quality

The material quality of a motor determines how well it can withstand wear and tear and is an indicator of its durability. Ensure that the material used in manufacturing the engine is durable and long-lasting.

For example, manufacturers often use aluminum alloys because they have good thermal conductivity properties and are lightweight. However, some motors are made from plastic or carbon fiber, which are equally durable and lightweight.

05. Motors’ Noise

Most electric skateboards are powered by electric motors, producing a high-pitched whine when you’re riding. This can be unpleasant if you’re trying to enjoy the silence of nature or if you want to avoid being noticed while traveling on your board.

Noise is produced by the motor itself, as well as the wheels spinning against the pavement. The noise level will vary based on how fast the motor spins (speed), how fast the wheels spin (velocity), and how rough the road surface is (acceleration).

The faster an electric skateboard goes, the more noise it will make. The same goes for having bigger wheels: going from a 100mm wheel to a 110mm wheel will increase noise levels because there’s more surface area for friction.

If you want to reduce noise levels without sacrificing speed or acceleration, look for a model with “brushless” motors instead of brushed ones — these are quieter than brushed motors because they have fewer moving parts that generate friction and heat when turning quickly.

06. How Easy is it to Install?

You might be wondering why this is important. Well, if you buy a motor that needs professional installation, you might not be able to use it when you need it most. The best engines for electric skateboards are easy to install by yourself so that you can enjoy riding your board in no time.

07. Remote control

The remote should be easy to use and have an excellent range to control the speed of your board from anywhere within range. This way, you can stop or slow down even when an obstacle is in front of you without any trouble!

08. Price/Budget

The more expensive motors tend to be better quality, but this isn’t always true. It is essential to do some research before you purchase so that you know what you’re getting yourself into.

You should also consider whether or not you will be able to afford maintenance on your board if something goes wrong with it later down the road.

If you can’t afford care, it might be best if you don’t buy an expensive motor right away since it will cost more money if something goes wrong later down the road.

09. Top Brands

There are many companies out there making motors for electric skateboards, but not all of them make high-quality products. Before making a purchase, do your research and find out what brands have the best reputation for durability and performance.

10. Warranty/After-Sell Service

Some motors come with warranties that protect against defects in manufacturing or materials. If possible, find a manufacturer that offers a comprehensive warranty that covers everything from components to labor costs in case something goes wrong with your board later on down the line.

Frequently Asked Questions

How Does an Electric Skateboard Motor Work?

Well, if you are wondering how electric motors work, then we have come up with some very basic information that will allow you to understand how a motor does what it does.

So, let us begin! First of all, you need to understand the concept of induction. If you have even a simple knowledge of physics, then it should not come as a surprise to you that due to the presence of a couple of components called an electric field and magnetic field, a force is generated. And this is what rotates the motors.

What is the Best Motor for an Electric Skateboard?

As a matter of fact, there are thousands of motors in the market at this age, and it might not be a very easy task to find the best amongst so many options. Therefore, to reduce the load off of you, we have devised this article that contains three of the finest motors in business. However, if you want the best of the best, then Hobbysky 6374 is the better choice!

It contains all the necessary features to give you a fantastic experience. And, the price of the item is quite affordable, so almost anyone can enjoy all these features without a problem.

In addition to that, the motor features a heavy-duty construction which is why we can surely say that it is going to serve you for a long time. Plus, the power and efficiency that this beast will deliver to you are going to get you hooked on electric skateboarding.

Final Verdict

All the products that we have listed here are contenders for the title of the best motors for electric skateboards. We made sure that these items have the finest features a motor could have.

There is hope that you will be able to find the perfect match for your skateboard. Now, it is possible that you might not like the motors that we have suggested in this article, and if that is the case, then you can always choose something else. Let us know what you think down below.