Skateboarding In The Rain? Know Wet and Wild Challenge!
Skateboarding in the rain can be a unique and challenging experience. While it may not be the ideal condition to skateboard in, it is still possible to do so with the right equipment and precautions.
So, can you skateboard in the rain? The answer is both yes, however, there are a lot of things to consider. This blog will discuss the best practices for skateboarding in the rain. Including how to maintain your skateboard and tips for staying safe while shredding in wet conditions.
So, if you’re up for a little adventure and some added difficulty, grab your gear, and let’s hit the streets!
Can You Skate In The Rain?
Skating in the rain is possible, but it can be dangerous and difficult. Rain can make the skating surface slippery and unpredictable, increasing the risk of falls and injuries. It can also cause damage to the skateboard or roller skates.
It is important to note that rain can affect the grip and traction of the wheels on the skating surface. This can make it more difficult to control your speed and direction and increase the risk of slipping and falling.
It’s also important to consider visibility, as the rain can make it harder to see and be seen by others.
Additionally, the rain can cause rust or damage to the bearings, trucks, and deck of your skateboard or roller skates. If you need to skate in the rain, it is recommended to use waterproof protection for your gear.
What Happens If Your Skateboard Gets Wet?
If a skateboard gets wet, several potential issues can occur to the following components. As:
Deck/Board
Water can cause the deck’s wood to warp or become soft, weakening the board’s structure and making it less stable.
Rainwater can also make the deck dirty and cause it to lose its grip.
Wheels
Water can also cause the wheels to lose grip, making it harder to ride the board and less smooth.
Also, it can cause the wheel’s urethane to soften, making it prone to flat spotting.
Bearings
Rainwater can seep into the bearings, causing rust and damage. This can make the wheels harder to turn and cause the bearings to seize up, making it difficult to ride the board.
Trucks
Your skateboard trucks may rust if exposed to water for too long. Wiping them down with a dry rag or towel is a good way to prevent rust from forming.
Bolts and Nuts
Rust from rainwater can cause the threads on the bolts and nuts to become damaged, making it difficult to tighten or loosen them.
What To Do If Your Skateboard Gets Wet?
If your skateboard gets wet, it’s important to dry it off as soon as possible to prevent damage to the deck, trucks, and wheels. To go through the drying process, you should follow the following steps.
Arrange Tools
Here are some tools that you may need to disassemble a skateboard:
| Tool | Description |
|---|---|
| Skate tool | A multi-functional tool for skateboard maintenance, often including various wrenches, a screwdriver, and more. |
| Bearing press | Used to remove and install bearings on skateboard wheels. |
| Kingpin nut wrench | Used to adjust the tightness of the kingpin nut on trucks, affecting skateboard turning and stability. |
| Bearings Cleaner | Cleaning fluid or solvent, like rubbing alcohol, for cleaning and removing debris from skateboard bearings. |
Dissemble Parts
Once you have all the necessary tools arranged, now is time to disassemble your skateboard. If you are confused, here is a video showing you how to assemble your skateboard.
Dry All Parts
To dry up all parts, follow the following tips.
| Step | Instructions |
|---|---|
| 01 | Wipe down the deck: Use a towel or rag to wipe down the top and bottom of the deck, removing as much water as possible. |
| 02 | Dry the trucks: Use a towel or rag to wipe down the trucks, including the axles and the baseplate. |
| 03 | Dry the wheels: Use a towel or rag to wipe down the wheels, removing any water that may have accumulated in the hub or around the bearings. |
| 04 | Remove any remaining water: Use a dry towel or rag to remove any remaining water from the deck, trucks, and wheels. |
Use Lubricants Or Better Oil
If the bearings get wet, it’s recommended to remove the wheels and clean the bearings with a little bit of oil. And then reassemble the wheel once you are done.
Store in a Dry Place
Once the board is completely dry, store it in a dry place away from direct sunlight and heat sources.
- Why Is My Skateboard So Slow? Discover 10 Solutions!
- Can You Bring a Skateboard on a Plane? All Airlines Policies
How Do Skateboarders Enjoy The Rain?
Skateboarders may enjoy the rain by following these tips:
Under The Roof
Yes, some skateboarders may choose to skate under a roof or in an indoor skatepark during rainy weather. This allows them to continue to practice and enjoy their hobby without getting wet.
Use An Old Skateboard
Using an older or cheaper board that is not as valuable or sentimental to the Skateboarder can help prevent damage to your more expensive gear. Additionally, you can also use special grip tapes that are more resistant to getting wet.
Limit Speed
Skateboarders may enjoy the rain by riding at a slower speed and taking extra caution when riding in wet weather. Rain can make the surface of the skateboard slippery and can make it more difficult to control the board.
Control on Stopping
Rain can make the surface of the skateboard slippery and can make it more difficult to stop quickly or maintain control when stopping.
.
Frequently Asked Questions
We understand the concerns you may have regarding your skateboard. In this section, we’ll answer some of the most common queries people have regarding the matter.
Can Electric Skateboards Get Wet?
For Any electric skateboard, rain can be an enemy. Water can damage the electronics and motors of the skateboard. The best way to protect your electric skateboard from water damage is to keep it dry and away from moisture.
How Can Normal Water Affect My Skate?
When skateboarding, it is important to avoid skating on wet surfaces, especially when using water. Water can cause your board to become slippery, which can make it difficult to control and increase the risk of falls and injuries.
Is It Bad To Skateboard In The Rain?
Skateboarding in the rain is not recommended, as it can be dangerous. The decks and trucks can become slippery, making the wet ground difficult to ride on. Additionally, the rain can damage the bearings, making it difficult to ride.
Conclusion
Skateboarding in the rain can sound fun, but taking the necessary precautions before attempting it is essential. It is important to wear protective gear and make sure your board has proper grip and that the surface you are skating on is safe.
Additionally, be aware of your surroundings, and be sure to stay away from puddles and wet areas. With the proper safety precautions and knowledge, skateboarding in the rain can be an enjoyable experience.
