Let's Review iWonder Cloud Wheels

iWonder Cloud Wheels: Check Our Honest Review

One of the most prominent inventions in the world is something we take for granted. Wheels. They are used for different modes of transport, cars, buses, airplanes, and even skateboards.

All of these moves because the round wheels enable them to do so. Specifically for today, we have the iWonder cloud wheels review.

Here I will give you all the necessary information which will allow you to make an educated decision whether you want to spend your money on the wheels, or are you better off without this option.

Let’s Review iWonder Cloud Wheels


Without further ado, let’s get to all the information about iWonder skateboard wheels.

What Is the Cloudwheel?

iWonder is known for manufacturing wheels for skateboards as they have been doing it for a long while the quality of the wheels they produce is very good. 

Here, we will talk about the Cloudwheels, a newer variation of the original wheels now available in the market. There are a number of differences between the original wheels they used to produce and these Cloudwheels.

iWonder Cloud Wheels: Check Our Honest Review

The core itself is one of the main selling points of the new wheels. They are a safer choice as the wheels are impact resistant. So, if you are hit in some direction, you are less likely to lose control of the skateboard.

01. Wheel Core and Size

As I mentioned before, the core of the Cloudwheel is different from the original wheel. The reason why it is impact resistant and does not get bent out of shape whenever under stress is because of the high-quality material used in its construction.

So, this is a safer option for you. Now for the size of the wheels, they are 40% larger than the original wheels. A larger wheel is a better option because you will be able to stake uninterruptedly. There won’t be rocks or stones grazing the bottom of your board and making a mess.

The size of the Cloudwheel is determined by the core, and its core is large. Therefore, the wheels have to be bigger to accommodate them.

02. Foam Cora Technology

iWonder has developed a foam core technology that is different from all others available in the market. They have their damping foam core patented as it is able to filter out a lot of the vibration created by road friction. This is one of the most prominent discoveries in the world of skateboards.

Vibrations are a big issue while skateboarding, so if it can be taken out of the equation, you will enjoy the ride a lot more. So much so that you will not want to go back to any other wheels.

03. Curved Wheel and Unique Tread

As we know, the tread pattern on wheels is very important for safety as it usually determines how well it will perform when coming to a halt or upon impact.

The curved tread on the Cloudwheel has been designed in such a way that it would brace itself against most oncoming dangers. These wheels have increased grip on the road, and therefore they do not skid.

All this is possible because of the thread of the wheels. You don’t have much to worry about when it comes to the matter of your safety if you have the Cloudwheels installed on your skateboard! 

04. Unique Design

We tend to buy things when we see something interesting; this is especially true when it comes to our skateboards. This is why I think the iWonder skateboard wheels are absolutely perfect for all the youngsters riding around on their skateboards. 

The Cloudwheels are not just the safest option, but they are also much better looking than most other wheels; this includes iWonder’s original wheels.

05. Mount on Many Eboards

We all own different kinds of skateboards, and they are not likely to accommodate all kinds of wheels. Sometimes the manufacturers of the boards also make the iwheels and therefore we can’t replace them with others.

But this isn’t something you need to worry about if you are using the Cloudwheels. They come with their own set of pully, so you should be able to install them into different kinds of longboards as well as eboards.

All these features add to the experience of using these wheels.

06. Controllable Deformation Amount

Soft wheels are just one of the things most skaters are familiar with; they can be a bit of a problem as a lot of mileage is lost while taxiing due to the quality of the soft wheels. They tend to deform, and that leads to a few problems.

Thankfully, the cloudwheels have been made keeping this certain aspect in mind, which is why they have a controllable deformation amount. Because of this, you won’t suffer from lost miles. 

07. Speed and Weight

Both speed and weight are very important when it comes to riding a skateboard. The original iWonder wheels are fast, but the cloudwheels have been designed to have increased speed; the diameter of the wheels to 120mm has enabled them to do so.

As for the weight, the wheels might be bigger in size, but they happen to be very lightweight. It will not add a lot of burdens if you somehow want to carry the skateboard anywhere.

This is because they have a lower density which they can float on water if need be.

Is It Suitable for Vestar Mini or Boosted Mini X?

You should be able to use these wheels with the Vestar Mini without a problem because of the 11abec hub. But if you want to use the wheels with the Booster mini X, you need to get drive gears from their website. Then they will be compatible.

How Many Miles Will It Run Good?

If I were to give you an average, then I would say it works just fine when riding even more than 1000 miles. But, the right answer here is that you can use them as long as they don’t start wearing, which usually takes a very long while.

Conclusion


Hopefully. from this iWonder skateboard wheel review, you were able to understand what you are likely to get if you do end up investing your money into the cloudwheels.

Thanks for reading. Now enjoy your skating.

What Are The Important Factors While Purchasing the Best Longboard Bearings?

01. Size

8 mm bearings are commonly used. This size is perfect for the longboard bearing. You can choose the other sizes if they give you more comfort. But I will recommend you choose the 8mm bearing.

02. Type

You can get both the ball bearing and roller bearing around you. Most of the bearings are ball bearings. Ball bearings run faster and more smoothly than roller bearings. But ball bearings can not handle the load. In that case, the roller bearing performs well.

03. Durability

The bearing should be durable that can last a minimum of one year. You can increase its durability by cleaning regularly and running in dry places. Water and mud decrease their longevity quickly.

04. Performance

The performance of the bearings is the most important fact. If your longboard bearings are rough and run with less spin that will not satisfy you. Also, a smooth and fast bearing with noise will annoy you. So, check before buying if there is any defect in performance.

05. Precision

Precision is the exactness or correctness of the tolerance. The American manufacturers association uses ABEC to define precision. When the precision increases, the permissible range decreases. Precision is independent of bearing clearance. The higher the ABEC number, the tighter the bearing will be. Higher precision helps to move more smoothly and increase efficiency.

06. Lubrication Compatibility

Lubrication is a must before riding on your longboard. To convert your slow bearings into fast longboard bearings you have to clean them regularly and lubricate them. It will give a fast spinning movement.

07. ABEC rating

While buying bearings, you need to check whether it is ABEC-rated longboard bearings or not. ABEC rating stands for dimension. It only rates tolerances. Some ABEC classes are 1, 3, 5, 7, 9, and 11. ABEC rating 9 is tighter than ABEC rating 1. The more the ABEC rating, the more the precision will be.

08. Engraved seals

Engraved seals prevent entering dust and other material inside. It also holds the lubricant inside and prevents friction. Most of the brands use rubber material for easy cleaning and to prevent the entry of water inside. While buying, check all the seals properly.

09. Price

Price is a big factor when buying anything. If you get a bearing with better quality at less price, then that will attract you the most. People mainly buy this type of bearings the most. Also, you should not follow the misconception that more expensive things mean better. Most of the famous brands are budget-friendly and careful about quality.

10. Brand reputation

While buying high-quality longboard bearings, people follow reputed brands. If the reputation is good then people do not hesitate to buy from the brand.

11. Warranty/Guarantee

If the brand provides you with a warranty or guarantee, that will be a plus point for you. You can repair the bearings if any problem arises at no cost within the given time. Also, the refund policy is beneficial for the buyers. You can change the defective set or can return the set with a full refund.

FAQs About Longboard Bearings

These are some commonly asked questions by people about the best bearings for longboards.

Is it worth it to invest in more expensive longboard bearings?

No, it is not worth it to invest in more expensive longboard bearings. More expensive is not equal to best quality. You can get a high-quality bearing within a suitable budget.

How do I know if my longboard bearings need to be replaced?

If the bearings start producing noise and are rough to run after cleaning, then you need to replace your longboard bearings. Also, the bearing will not spin if it is worn out.

What is the difference between ceramic and steel bearings for longboards?

The difference between ceramic and steel bearings for Longboards is durability. Ceramic bearings are more durable, smooth, and corrosion-resistant. At the same time, steel bearings are easily damaged by corrosive substances and are less durable than ceramic ones.

Can I lubricate my longboard bearings myself, or do I need to take them to a professional?

You can lubricate your longboard bearings yourself. )r if you have no previous experience, then you need to take them to a professional. But choose the right lubricant for the bearings.

Can I mix and match different brands of bearings on my longboard?

You should not mix and match different brands of bearings on your longboard as they are different from each other in size, shape, durability, and performance. Mixing different brands is unable to balance your movement.

Can I use the same bearings for both my longboard and my skateboard?

Yes, you can use the same bearing for both your longboard and your skateboard. The only difference appears in the case of wheel size. Otherwise, there is no difference between the bearings. But you should be careful about the dimension of the spacer.

Conclusion

Now it will be easy for you to choose the best Bearings for Longboards. You can compare the bearings and choose according to your comfort. I will recommend you choose the bearings which are performing well and have good customer service. If you still can not choose a perfect one then you can select it by brand reputation.

Also, choosing the brands which are giving warranty is the safest to pick. You can get these ten best bearings within an affordable range. Do not choose the bearings which are rated below ABEC 3. Below 3 ABEC-rated bearings have less tolerance.

About the author

This is Kyle Spinks from Butte MT, USA. A skateboarding expert and lover since 2019. skateupdates.com is my blog where I share my skateboarding life experience daily or weekly. If you're a beginner skater, I'll advise you to follow my blog daily.

Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
Success message!
Warning message!
Error message!