• Home
  • /
  • FAQs
  • /
  • 7 Effective Ways To Hang A Skateboard Without Nails
How To Hang A Skateboard On The Wall Without Nails?

7 Effective Ways To Hang A Skateboard Without Nails

Attention all skateboarders! Want to give your collection the spotlight it deserves but don’t want to put any holes in your walls? Fear not! There are many creative ways to hang a skateboard without nails for avoiding any damage to the wall.

From using adhesive strips to installing floating strings, you’ll find the perfect solution for your space and style.

Ready to turn your walls into a stunning skateboard gallery? Keep reading to discover the 7 best no-nail hanging methods that will make your boards the envy of all your friends.

How To Hang a Skateboard Without Nails?


1. Hang String from Molding

Hanging your skateboard using a Hang String from molding is a simple and effective method that requires only a few materials. Here’s what you’ll need:

  • Hang String
  • Scissors
  • Ruler or measuring tape

Steps to Follow


  • Step 1: Measure the length of the Hang String needed to hang your skateboard by holding the end of the string against the top of the skateboard and marking the spot where it reaches the molding.
  • Step 2: Cut the Hang String to the desired length, allowing for some extra string on both ends for tying knots.
  • Step 3: Tie a knot on one end of the string and secure it to the screw on the molding.
  • Step 4: Hold the skateboard against the wall and tie the other end of the string to the bottom of the board.
  • Step 5: Adjust the string so that the board is level and tighten the knots.

And that’s it! Your skateboard is now securely hung on the wall, adding a unique touch to your room and keeping it safe from damage.

2. Take Advantage of Command Strips

Command Strips are great for hanging your skateboard on the wall without damaging the surface. Here’s what you’ll need:

  • Skateboard
  • Command Strips
  • Ruler or measuring tape
  • Pencil

Steps to Follow


  • Step 1: Clean the area on the wall where the Command Strips will be applied.
  • Step 2: Peel the backing off the Command Strips and apply them to the back of the skateboard, following the manufacturer’s instructions.
  • Step 3: Hold the skateboard against the wall and mark the top and bottom corners of the board with a pencil.
  • Step 4: Remove the skateboard from the wall and place the Command Strips on the marked spots, ensuring they are evenly spaced.
  • Step 5: Hang the skateboard back on the wall and press firmly on the Command Strips to secure the board in place.

That’s it! Your skateboard is now securely hanging on the wall, free from damage, and ready to be admired.

3. Use the Fireplace Topper Deck

A Fireplace Topper Deck is a simple and stylish way to hang your skateboard on the wall. Here’s what you’ll need:

  • Skateboard
  • Fireplace Topper Deck
  • Ruler or measuring tape

Steps to Follow


  • Step 1: Place the skateboard on the Fireplace Topper Deck, making sure it is level and centered.
  • Step 2: You can secure the skateboard to the Topper Deck by screwing it into place, not damaging the board.

And that’s it! Your skateboard is now secure on the wall, adding a stylish touch to your room and protecting it from damage.

The Fireplace Topper Deck is a great option for those who want to showcase multiple boards, as it can accommodate multiple boards stacked on top of each other.

4. Put it on a Pegboard

A pegboard is a versatile and practical way to showcase and keep your skateboard within reach. Here’s what you’ll need:

  • Skateboard
  • Pegboard
  • Screws
  • Wall anchors (if needed)
  • Hooks

Steps to Follow


  • Step 1: Install the pegboard on the wall, using screws and wall anchors if needed.
  • Step 2: Attach hooks to the pegboard, making sure they are spaced apart and level.
  • Step 3: Place the skateboard on the hooks, making sure it is secure and won’t fall off.

A pegboard is also a great option for those who want to showcase multiple boards, as it can accommodate multiple hooks for hanging multiple boards.

5. Do the Wall Lean

The wall lean is a simple and stylish way to hang your skateboard on the wall. Here’s what you’ll need:

  • Skateboard
  • Ruler or measuring tape
  • Pencil

Steps to Follow


  • Step 1: Hold the skateboard against the wall at the desired height and angle, making sure it’s balanced and won’t fall over.
  • Step 2: Mark the top and bottom of the board with a pencil.
  • Step 3: Place the skateboard against the wall, resting it on the marks.

The wall lean is a great option for those who want to showcase multiple boards, as you can stack multiple boards on top of each other. It’s also a quick and easy option for those who want to switch up the look of their walls without damaging the surface.

6. Use Your Bookshelf

Using your bookshelf to display your skateboard is a practical and stylish way to keep it within reach and show it off. Here’s what you’ll need:

  • Skateboard
  • Ruler or measuring tape
  • Pencil

Steps to Follow


  • Step 1: Measure the width and height of your skateboard.
  • Step 2: Place the skateboard on the shelf, making sure it fits and won’t fall off.
  • Step 3: Arrange other items on the shelf around the skateboard to create a balanced and stylish display.

And that’s it! Your skateboard is now on display, adding a unique touch to your room and protecting it from damage.

Using a bookshelf is a great option for those who want to showcase multiple boards, as you can stack multiple boards on the shelf for a striking display.

7. Start With the Floor

Displaying your skateboards on the floor is a practical and stylish way to show off your collection and keep them within reach. Here’s what you’ll need:

  • Skateboards
  • Ruler or measuring tape
  • Pencil

Steps to Follow


  • Step 1: Measure the space where you want to display your skateboards.
  • Step 2: Arrange the skateboards on the floor, ensuring they fit and are evenly spaced apart.
  • Step 3: Mark the location of each skateboard with a pencil.
  • Step 4: Place each skateboard in its marked location, ensuring it’s level and stable.

Displaying your boards on the floor is a great option for those with limited wall space who want to showcase multiple boards strikingly and practically.

Conclusion


Learning how to mount a skateboard to the wall without nails is a great way to keep your board safe and showcase them. Whether you choose to use a pegboard, wall lean, bookshelf, or floor display, you’ll be able to create a display that represents your love for skateboarding.

Each option offers unique benefits and challenges. So it’s important to consider your space, budget, and personal preferences when deciding. With these tips and tricks in hand, you’ll be able to hang a skateboard on the wall without nails and enjoy your collection for years to come.

What Are The Important Factors While Purchasing the Best Longboard Bearings?

01. Size

8 mm bearings are commonly used. This size is perfect for the longboard bearing. You can choose the other sizes if they give you more comfort. But I will recommend you choose the 8mm bearing.

02. Type

You can get both the ball bearing and roller bearing around you. Most of the bearings are ball bearings. Ball bearings run faster and more smoothly than roller bearings. But ball bearings can not handle the load. In that case, the roller bearing performs well.

03. Durability

The bearing should be durable that can last a minimum of one year. You can increase its durability by cleaning regularly and running in dry places. Water and mud decrease their longevity quickly.

04. Performance

The performance of the bearings is the most important fact. If your longboard bearings are rough and run with less spin that will not satisfy you. Also, a smooth and fast bearing with noise will annoy you. So, check before buying if there is any defect in performance.

05. Precision

Precision is the exactness or correctness of the tolerance. The American manufacturers association uses ABEC to define precision. When the precision increases, the permissible range decreases. Precision is independent of bearing clearance. The higher the ABEC number, the tighter the bearing will be. Higher precision helps to move more smoothly and increase efficiency.

06. Lubrication Compatibility

Lubrication is a must before riding on your longboard. To convert your slow bearings into fast longboard bearings you have to clean them regularly and lubricate them. It will give a fast spinning movement.

07. ABEC rating

While buying bearings, you need to check whether it is ABEC-rated longboard bearings or not. ABEC rating stands for dimension. It only rates tolerances. Some ABEC classes are 1, 3, 5, 7, 9, and 11. ABEC rating 9 is tighter than ABEC rating 1. The more the ABEC rating, the more the precision will be.

08. Engraved seals

Engraved seals prevent entering dust and other material inside. It also holds the lubricant inside and prevents friction. Most of the brands use rubber material for easy cleaning and to prevent the entry of water inside. While buying, check all the seals properly.

09. Price

Price is a big factor when buying anything. If you get a bearing with better quality at less price, then that will attract you the most. People mainly buy this type of bearings the most. Also, you should not follow the misconception that more expensive things mean better. Most of the famous brands are budget-friendly and careful about quality.

10. Brand reputation

While buying high-quality longboard bearings, people follow reputed brands. If the reputation is good then people do not hesitate to buy from the brand.

11. Warranty/Guarantee

If the brand provides you with a warranty or guarantee, that will be a plus point for you. You can repair the bearings if any problem arises at no cost within the given time. Also, the refund policy is beneficial for the buyers. You can change the defective set or can return the set with a full refund.

FAQs About Longboard Bearings

These are some commonly asked questions by people about the best bearings for longboards.

Is it worth it to invest in more expensive longboard bearings?

No, it is not worth it to invest in more expensive longboard bearings. More expensive is not equal to best quality. You can get a high-quality bearing within a suitable budget.

How do I know if my longboard bearings need to be replaced?

If the bearings start producing noise and are rough to run after cleaning, then you need to replace your longboard bearings. Also, the bearing will not spin if it is worn out.

What is the difference between ceramic and steel bearings for longboards?

The difference between ceramic and steel bearings for Longboards is durability. Ceramic bearings are more durable, smooth, and corrosion-resistant. At the same time, steel bearings are easily damaged by corrosive substances and are less durable than ceramic ones.

Can I lubricate my longboard bearings myself, or do I need to take them to a professional?

You can lubricate your longboard bearings yourself. )r if you have no previous experience, then you need to take them to a professional. But choose the right lubricant for the bearings.

Can I mix and match different brands of bearings on my longboard?

You should not mix and match different brands of bearings on your longboard as they are different from each other in size, shape, durability, and performance. Mixing different brands is unable to balance your movement.

Can I use the same bearings for both my longboard and my skateboard?

Yes, you can use the same bearing for both your longboard and your skateboard. The only difference appears in the case of wheel size. Otherwise, there is no difference between the bearings. But you should be careful about the dimension of the spacer.

Conclusion

Now it will be easy for you to choose the best Bearings for Longboards. You can compare the bearings and choose according to your comfort. I will recommend you choose the bearings which are performing well and have good customer service. If you still can not choose a perfect one then you can select it by brand reputation.

Also, choosing the brands which are giving warranty is the safest to pick. You can get these ten best bearings within an affordable range. Do not choose the bearings which are rated below ABEC 3. Below 3 ABEC-rated bearings have less tolerance.

About the author

This is Kyle Spinks from Butte MT, USA. A skateboarding expert and lover since 2019. skateupdates.com is my blog where I share my skateboarding life experience daily or weekly. If you're a beginner skater, I'll advise you to follow my blog daily.

Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
Success message!
Warning message!
Error message!