• Home
  • /
  • Skateparks
  • /
  • Top 9 Best Skate Parks In Houston, Texas (Updated 2023)
Top 9 Best Skate Parks In Houston, Texas

Top 9 Best Skate Parks In Houston, Texas (Updated 2023)

Houston is a great city for skateboarders! With its warm climate, beautiful scenery, and excellent skate parks, it’s easy to see why. Whether you’re a novice skater or a seasoned pro, there are plenty of spots to shred in Houston.

I’ll talk about the best skate parks in Houston Texas, and what they’re known for. Whether you’re looking for a street park, a bowl park, or a combination – I’ve got something for everyone. Check out the list below to see which skate park you should try!

In Details of Best Skate Parks in Houston


I’ll highlight the top 9 skate parks in the Houston area and outline their features so you can decide which skate park is best for you.

1. Addicks Skate Park

Addicks Skate Park is perfect for beginners. However, it has various challenging street course elements that advanced skaters might appreciate, especially if you don’t mind skating on prefab metal ramps. Its proximity to the Congressman Bill Archer Dog Park means you can take a break from shredding and enjoy watching the dogs play.

Features

  • Stairs
  • Ledges
  • Quarter pipe
  • Bank
  • Funbox
  • Flat rail, kinked rail, and handrail
  • Roll-in
  • Curb
  • Manual pad

Restrictions

  • BMX bikes are not allowed

Directions and Routes

Take Highway 6 and branch into Congressman Bill Archer Dog Park. You can also Follow I-10 W to Interstate 10 Frontage Rd W. Take exit 753A from I-10 W. after getting into the bears creek pioneers park, turn west on Patterson Rd to get to the skatepark. // Skateparks In Las Vegas, Nevada //

Key Information


  • Location: Addicks Park Ten, Houston
  • Address: 3201 Hwy 6, Houston, TX 77084
  • Riding Type: Skateboards & in-line skates
  • Skate Hours: 24 hours
  • Cost fee: Free
  • Instructors: No
  • Number of participants: up to 50
  • Size: 7,500 square feet
  • Lights: Yes
  • Opened: 2015
  • Design: Unknown
  • Type of skatepark: Street plaza

2. Alief Skatepark

Alief Skatepark is one of the newest skate parks in Houston Texas. This impressive skate park offers plenty of room to practice your skills. It has a giant street course with an in-ground concrete layout designed to help you practice technical skateboarding tricks.

Features

  • Hubbas
  • Stairs
  • Funboxes
  • Curbs
  • Ledges
  • Handrails and flat rails
  • Quarter pipes
  • Extension
  • Pyramid
  • Volcano
  • Banks
  • Manual pads

Restrictions:

No restrictions

Directions and Routes

Head north on South Kirkwood Road and branch left into the Alief Community Park. // Skateparks In El Paso, Texas //

Key Information


  • Location: Alief Community Park, Houston
  • Address: 7114 S Kirkwood Rd, Houston, TX 77072
  • Riding Type: Skateboards & in-line skates
  • Skate Hours: 24 hours
  • Cost fee: Free
  • Instructors: No
  • Number of participants: 100
  • Size: 15,000 square feet
  • Lights: Yes
  • Opened: 2022
  • Design: Evergreen Skateparks (One of the best skatepark designers and builders)
  • Type of skatepark: Street plaza

3. Cliff Tuttle Skate Park

The Cliff Tuttle Skate Park, also known as the Joe and Theresa Padilla Skate Park, is a great flat park for beginners in Houston. It features several pre-fab ramps and obstacles perfect for learning the basics. So, you can spend a few hours here learning tricks before transitioning to advanced skate parks.

Features

  • Bank ramps
  • Quarter pipes
  • Grind boxes
  • Rails
  • Stairs
  • Ledges

Restrictions

There are no restrictions to skate Cliff Tuttle Skate Park

Directions and Routes

Take Lyon Avenue and branch into Woolworth Street. // Skateparks In Phoenix, Arizona //

Key Information


  • Location: Cliff Tuttle Park, Denver Harbor, Houston
  • Address: 6200 Lyons Ave, Houston, TX 77020
  • Telephone: (713) 865-4500
  • Website: https://www.houstontx.gov
  • Riding Type: Skateboards & in-line skates
  • Skate Hours: Dawn to dusk
  • Cost fee: Free
  • Instructors: No
  • Number of participants: 36
  • Size: 4500 square feet
  • Lights: No
  • Opened: 2008
  • Design: American Ramp Company
  • Type of skatepark: Street plaza

4. Clinton Skatepark

Many consider Clinton Skatepark a replica of the Watonga Skate Park. However, plenty of cool things, like lush green surroundings, make this place worth visiting! It lacks bowls, but there are more than enough street course obstacles to satisfy even the most experienced pro.

Features

  • Half pipes
  • Quarter pipes
  • Roll-in
  • Bank ramps (one with a kicker)
  • Street spine, grind rails (straight and kinked)
  • Jump Box
  • Grind ledge
  • Pyramid
  • Grind box (kinked) and a sub box

Restrictions

There are no restrictions to skate Clinton Skatepark

Directions and Routes

Take the 200 Mississippi Street into the Clinton Park. // Skateparks in Miami, Florida //

Key Information


  • Location: Clinton Park, Houston
  • Address: 200 Mississippi St, Houston, TX 77029
  • Email: estella.espinosa@houstontx.gov
  • Telephone: +1 713-837-0311
  • Website: https://www.houstontx.gov
  • Riding Type: Skateboards, scooters, rollerblades, and bikes
  • Skate Hours: Opens 24 hours
  • Cost fee: Free
  • Instructors: No
  • Number of participants: 80
  • Size: 12,000 square feet
  • Lights: No
  • Opened: 2005
  • Design: American Ramp Company
  • Type of skatepark: Street plaza

5. EZ7 Skate Park

EZ7 Skate Park is Houston’s oldest skate park, having welcomed skateboarders since the 1970s. This park was originally a drainage ditch but has since been repurposed into a popular skate spot. This concrete ditch is known for its graffiti, challenging structures, annual Turkey Jam, and proximity to Watonga Skate Park.

Features

  • Mini spines
  • Quarter pipes
  • Extensions
  • Metal ramps

Restrictions

No restrictions

Directions and Routes

Use the right 3 lanes to stay on I-10 W on Katy freeway from Houston city center. You will eventually turn north with the road. And get to Mangum Rd which will lead you to Watonga blv. // Skateparks In Los Angeles, California //

Key Information


  • Location: Watonga Parkway, Northwest Houston
  • Address: Watonga Blvd, Houston, TX 77092
  • Telephone: +1 832-952-8286
  • Riding Type: Skateboard, rollerblade, BMX, scooter
  • Skate Hours: open 24 hours
  • Cost fee: Free
  • Instructors: No
  • Number of participants: Up to 100 at a time
  • Size: 18000 sq ft
  • Lights: No
  • Opened: 1970
  • Design: Unknown
  • Type of skatepark: Street plaza

6. Gulfton Skatepark

The $1.1 million Gulfton Skate Park, also known as the Station or Burnett Bayland Skate Park, is one of the best skating destinations in Houston, and a winner of the  2019 H-GAC Our Great Region Awards. The concept of this incredible spot came from local youth who wanted to create a place to practice and make their skating dream a reality.

Features

  • A flow bowl
  • Volcano
  • Transitions
  • Grind ledges
  • Upper decks
  • Stairs
  • Handrails and flat bars
  • Banks
  • Quarter pipe

Restrictions

No restrictions

Directions and Routes

Get on Gulfton Street and branch South into Chimney Rock Road. // Skateparks In Kansas City, Missouri //

Key Information


  • Location: Burnett Bayland Park, Houston
  • Address: 6000 Chimney Rock Road, Houston, TX 77081
  • Email: N/A
  • Telephone: (713) 865-4500
  • Website: https://www.houstontx.gov
  • Riding Type: Skateboards & in-line skates
  • Skate Hours: 8 am- 4:30 pm (Mon, Tue, Wed, Thu, Fri), 10 am – 2 pm (Sat)
  • Cost fee: Free
  • Instructors: No
  • Number of participants: up to115 at a time
  • Size: 17,500 square feet
  • Lights: Yes
  • Opened: 2017
  • Design: Clark Condon
  • Type of skatepark: Flow park

7. Lee and Joe Jamail Skatepark

Lee and Joe Jamail Skatepark is the hub of Houston’s skateboarding culture, boasting the world’s largest cradle and breathtaking graffiti. This $2.7 million project in Buffalo Bayou Park is the first public concrete skating facility in Houston capable of holding national and international skateboarding competitions. It also serves as the city’s first world-class, in-ground skate spot!

Features

  • A kidney bowl (featuring aggregate pool coping)
  • Flow bowl (featuring a 20-foot cradle and 12.5-foot deep end)
  • 14-foot bank
  • Mini bowl connected the street plaza with a smaller cradle
  • Hubbas
  • Funboxes
  • Curbs
  • Stairs
  • Ledges
  • Handrails & flat rails
  • Manual pads
  • Quarter pipes
  • London gap

Restrictions

BMX bikes are not permitted, and you can’t skate without a helmet.

Directions and Routes

Get on Memorial Drive and branch into Sabine Street. // Skateparks In San Francisco, California //

Key Information


  • Location: Eleanor Tinsley Park, Downtown Houston
  • Address: 103 Sabine Street Houston, TX 77007
  • Email: jamail.skatepark@houstontx.gov
  • Telephone: +1 713-222-5500
  • Website: https://www.houstontx.gov
  • Riding Type: Skateboarding, roller skating, and rollerblading
  • Skate Hours: 9 am – 10 pm
  • Cost fee: Free
  • Instructors: Yes
  • Number of participants: Up to 200 at a time
  • Size: 30,000 square feet
  • Lights: Yes
  • Opened: 2008
  • Design: Grindline Skateparks
  • Type of skatepark: Flow park

8. North Houston Skatepark

Also referred to as Spring Skate Park, this $5.5 million skatepark is the 2nd largest in the country after the Lauridsen Skatepark and the 4th largest in the world. Most skaters love it for its Texas-shaped bowl and killer snake run. And if you’re brave enough, you can try out the Dallas section, a deeper (12 feet) part of the bowl.

Features

  • 10-foot bowl
  • Vert bowl (12 feet)
  • Full pipe (20 feet)
  • Snake run
  • Quarter pipes
  • Ledges
  • Hubbas
  • Banks
  • A-frames
  • Manual pads
  • Flat rails and handrails
  • Extensions
  • Pentagon-shaped pyramid

Restrictions

You must have a helmet to skate

Directions and Routes

From Houston, it is a 16 minutes ride north. Get to Kuykendahl road. You Get on I-45 N and then follow I-45 N to N Fwy Service Rd. Take exit 62 from I-45 N. // Skateparks In Virginia Beach, VA //

Key Information


  • Location: Dylan’s Park, North Houston
  • Address: 12351 Kuykendahl Rd, Houston, TX 77067
  • Telephone: +1 281-873-6422
  • Website: https://www.northhouston.org/
  • Riding Type: Skateboards, rollerblades, and quad skates
  • Skate Hours: 10 am – 9 pm (Mon, Wed, Thu, Fri, Sun), 8 am – 10 pm (Sat)
  • Cost fee: Free
  • Instructors: Yes
  • Number of participants: 520
  • Size: 78,000 square feet
  • Lights: Yes
  • Opened: 2014
  • Design: Grindline Skateparks
  • Type of skatepark: Flow park

9. Southside Skatepark

This historic indoor skate park has been a fixture in the Houston community for over two decades. It is actually the oldest privately owned skatepark and skate shop in all of Houston, hosting numerous competitions and demos over the years. Southside Skatepark has a wooden riding surface with bowl and street courses for all skill levels.

Features

  • Birch bowl
  • Mini ramps
  • Quarter pipes
  • Ledges
  • Manual pads
  • Stairs
  • Bank ramps

Restrictions

Skaters who are 15 years and below can’t skate without a helmet.

Directions and Routes

From the Houston Blvd branch into Iowa Street.

Key Information


  • Location: Houston Blvd, South Houston
  • Address: 510 Iowa St, South Houston, TX 77587
  • Telephone: +1 713-946-0414
  • Website: https://southsideskatepark.com/
  • Riding Type: Skateboards
  • Skate Hours: 2 pm – 9 pm (Mon, Tue, Wed, Thu), 2 pm to 10 pm (Fri), 11 am – 9 pm (Sat), 1 pm – 8 pm (Sun)
  • Cost fee: Members ($5), non-members ($10)
  • Instructors: Yes
  • Number of participants: 90
  • Size: 13,500 square feet
  • Lights: Yes
  • Opened: 1994
  • Design: Southside Skatepark
  • Type of skatepark: Flow park/ Indoor

Conclusion


Houston offers some of the best skate parks in the country. From sprawling flow parks with various features to dedicated street plazas, there’s something for everyone. Whether you’re an experienced skater or just getting started, the nine skate parks featured above are must-visit destinations for any fan of skateboarding.

Each park has its own unique style and features, so take the time to explore each one and find the perfect spot for your next session. Enjoy your time at these awesome skate parks Houston has to offer!

What Are The Important Factors While Purchasing the Best Longboard Bearings?

01. Size

8 mm bearings are commonly used. This size is perfect for the longboard bearing. You can choose the other sizes if they give you more comfort. But I will recommend you choose the 8mm bearing.

02. Type

You can get both the ball bearing and roller bearing around you. Most of the bearings are ball bearings. Ball bearings run faster and more smoothly than roller bearings. But ball bearings can not handle the load. In that case, the roller bearing performs well.

03. Durability

The bearing should be durable that can last a minimum of one year. You can increase its durability by cleaning regularly and running in dry places. Water and mud decrease their longevity quickly.

04. Performance

The performance of the bearings is the most important fact. If your longboard bearings are rough and run with less spin that will not satisfy you. Also, a smooth and fast bearing with noise will annoy you. So, check before buying if there is any defect in performance.

05. Precision

Precision is the exactness or correctness of the tolerance. The American manufacturers association uses ABEC to define precision. When the precision increases, the permissible range decreases. Precision is independent of bearing clearance. The higher the ABEC number, the tighter the bearing will be. Higher precision helps to move more smoothly and increase efficiency.

06. Lubrication Compatibility

Lubrication is a must before riding on your longboard. To convert your slow bearings into fast longboard bearings you have to clean them regularly and lubricate them. It will give a fast spinning movement.

07. ABEC rating

While buying bearings, you need to check whether it is ABEC-rated longboard bearings or not. ABEC rating stands for dimension. It only rates tolerances. Some ABEC classes are 1, 3, 5, 7, 9, and 11. ABEC rating 9 is tighter than ABEC rating 1. The more the ABEC rating, the more the precision will be.

08. Engraved seals

Engraved seals prevent entering dust and other material inside. It also holds the lubricant inside and prevents friction. Most of the brands use rubber material for easy cleaning and to prevent the entry of water inside. While buying, check all the seals properly.

09. Price

Price is a big factor when buying anything. If you get a bearing with better quality at less price, then that will attract you the most. People mainly buy this type of bearings the most. Also, you should not follow the misconception that more expensive things mean better. Most of the famous brands are budget-friendly and careful about quality.

10. Brand reputation

While buying high-quality longboard bearings, people follow reputed brands. If the reputation is good then people do not hesitate to buy from the brand.

11. Warranty/Guarantee

If the brand provides you with a warranty or guarantee, that will be a plus point for you. You can repair the bearings if any problem arises at no cost within the given time. Also, the refund policy is beneficial for the buyers. You can change the defective set or can return the set with a full refund.

FAQs About Longboard Bearings

These are some commonly asked questions by people about the best bearings for longboards.

Is it worth it to invest in more expensive longboard bearings?

No, it is not worth it to invest in more expensive longboard bearings. More expensive is not equal to best quality. You can get a high-quality bearing within a suitable budget.

How do I know if my longboard bearings need to be replaced?

If the bearings start producing noise and are rough to run after cleaning, then you need to replace your longboard bearings. Also, the bearing will not spin if it is worn out.

What is the difference between ceramic and steel bearings for longboards?

The difference between ceramic and steel bearings for Longboards is durability. Ceramic bearings are more durable, smooth, and corrosion-resistant. At the same time, steel bearings are easily damaged by corrosive substances and are less durable than ceramic ones.

Can I lubricate my longboard bearings myself, or do I need to take them to a professional?

You can lubricate your longboard bearings yourself. )r if you have no previous experience, then you need to take them to a professional. But choose the right lubricant for the bearings.

Can I mix and match different brands of bearings on my longboard?

You should not mix and match different brands of bearings on your longboard as they are different from each other in size, shape, durability, and performance. Mixing different brands is unable to balance your movement.

Can I use the same bearings for both my longboard and my skateboard?

Yes, you can use the same bearing for both your longboard and your skateboard. The only difference appears in the case of wheel size. Otherwise, there is no difference between the bearings. But you should be careful about the dimension of the spacer.

Conclusion

Now it will be easy for you to choose the best Bearings for Longboards. You can compare the bearings and choose according to your comfort. I will recommend you choose the bearings which are performing well and have good customer service. If you still can not choose a perfect one then you can select it by brand reputation.

Also, choosing the brands which are giving warranty is the safest to pick. You can get these ten best bearings within an affordable range. Do not choose the bearings which are rated below ABEC 3. Below 3 ABEC-rated bearings have less tolerance.

About the author

This is Kyle Spinks from Butte MT, USA. A skateboarding expert and lover since 2019. skateupdates.com is my blog where I share my skateboarding life experience daily or weekly. If you're a beginner skater, I'll advise you to follow my blog daily.

Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
Success message!
Warning message!
Error message!