• Home
  • /
  • Skateparks
  • /
  • Top 10 Best Skate Parks In El Paso, Texas (Updated 2023)
Top 10 Best Skate Parks In El Paso, Texas

Top 10 Best Skate Parks In El Paso, Texas (Updated 2023)

Some of the best recreation and amusement centers are the skate parks in El Paso Tx. There are many reasons. The views of these parks are mesmerizing. Also, these parks offer the opportunity to combine physical activities with refreshments. Hence you should know about all the best skateparks in El Paso.

Skateparks like Carolina Skatepark, Northeast Regional, Mountain View Skate Park, and Veteran’s Park  Skatepark are some of the best in El Paso. Moreover, Album Skate Park, Braden Aboud, Dick Shinaut, El Paso Green Bowl, Pollard Skate Ditch, and Ysleta are also here.

There can be many queries about various details of these parks in your mind. Whether they are outdoor or indoor if there’s light or not etc. Keep reading today’s article to get all your answers.

In Detail of The Best Skate Parks in El Paso

Let’s check all the details of the top 10 skate parks in El Paso, Texas.

1. Album Skate Park

The Album skate park is one of the outdoor skate parks in El Paso. It is located in the Palacio Recreation Center, Parkwood Street.

The park offers wifi facilities all over the place. Moreover, there are sufficient parking spaces for any vehicle. Especially for skating, the park features a funbox, spine ramps, quarterpipes, banks, etc. The park is free for all and stays open from 6 am to 10 pm.

Features of the park

  • Funbox, Spine Ramp
  • Banks, Quarterpipe

Restrictions: 

Directions and Routes

The park is not far from the Scotsdale Baptist church. You can go to the park from the church via Album Ave toward the east which will take you a 3-minute drive to Parkwood St. // Skate Parks In Los Angeles, California //

Basic Information

2. Braden Aboud Skatepark

Braden Aboud Skatepark is another of the outdoor skateparks El Paso offers. This is situated in the  Braden Aboud Memorial Park, Roxbury. It’s run by the Braden Aboud Memorial Foundation.

In 2007, the foundation was founded by volunteers who serve on a board of directors. A cross-section of professionals and community leaders contribute their expertise to the Foundation’s annual projects.

The skatepark is open every day from 6 am to 10 pm.

Features:

  • Ramps, funbox
  • Solid surface
  • Quarter pipes, ledge

Restrictions:

  • No graffiti, sticker, or littering
  • No smoking, tobacco, or alcohol
  • Must need safety gear
  • Skateboarding and inline skating only

Directions and Routes:

The Braden Aboud Skate park is a 3-minute drive toward the northwest from the historical Keystone Heritage Park and El Paso Desert Botanical Garden. You can get into the park via Frontera Rd and River Bend Dr. The park will be on your right on Ruxbury Dr when you take a right turn on the Dr from River Bend Dr. // Skate Parks in Atlanta, Georgia //

Basic Information

3. Carolina Skatepark

Founded in 2003, this skatepark is El Paso’s first “concrete” skatepark.  Site Design Group’s Mike McIntyre and Colby Carter drafted the 23,143-square-foot layouts. An estimated $625-thousand Community Development Block Grant funded this project.

This park is perfect for beginners learning how to carve, roll down banks, and carve. Moreover, the terrains of this park are diversified.

Flow courses and 10′ deep bowls make for perfect transition riding. Located on the other half of the skate park, the street section has quarter pipes, pyramids, bank ramps, ledges, and handrails.

Features of the park

  • Obstacles include Hubba, curb, roll-in, quarterpipe, handrail, bowl, etc.
  • No restroom
  • No shop on the park site
  • The surface is concrete

Restrictions:

None

Directions and Routes:

The park is near the El Paso Community College-Valle Varde Campus and San Antonio Catholic church. You can get into the park via Adobe Dr and Ladera Rd toward the southeast. The park will be on your left. // Skate Parks On Long Island, New York //

Basic Information

4. Dick Shinaut Park

The El Paso parks department maintains Dick Shinaut park. In September 2002, it became the first of El Paso skateparks. Besides offering outdoor recreation, it also preserves nature.

The skate wave modular metal ramp equipment at this park in Far East El Paso was manufactured and assembled by Exerplay Inc. By locals; this park was nicknamed “Saul Kleinfeld.”.

Features of the park

  • Obstacles include bank/wedge ramp, funbox
  • Half pipe, quarter pipe, Ledge
  • Metal surface
  • Clean and well-maintained

Restrictions

Directions and Routes:

The park is near EP Fitness- Montwood. You can go to the park from EP Fitness straight to the north via Saul Kleinfeld Dr. The park will be on your right beside the drive. // Skate Parks In San Francisco, California //

Basic Information

5. El Paso Green Bowl Skate Park

This is another outdoor skatepark located on Van Buren Ave, El Paso. It is a canal-based water reservoir built by the city of El Paso that has secondary uses as a skate park.

El Paso is known for its amazing ditch spots, which draw many pro skate teams. This is one of them. By the way, many people don’t know about this. It’s also called a hidden skatepark by the locals due to its physical state.

Features of the park:

  • Obstacles include a quarterpipe, ledge, stairs, mini ramp, and bowl
  • Concrete Park

Restrictions:

None

Directions and Routes:

The hidden park is easily accessible from El Paso Municipal Rose Garden via N Copia St and Van Buren Ave toward the northwest. The park will be on your left from Van Buren Ave, which will take you a 5-minute drive. // Skate Parks In Virginia Beach, VA //

Basic Information

  • Location: https://goo.gl/maps/4gN1WH5r9X5SKxXJ8
  • Address: 2808 Van Buren Ave, El Paso, TX 79930, United States
  • Skate Hours: 6 am to 10 pm.
  • Type of skatepark: Outdoor
  • Riding Type: Skateboard, rollerblading, BMX, Scooter
  • Cost fee: Free
  • Instructors: No
  • Number of participants: Up to 30 at a time
  • Size: 5500 square feet
  • Lights: Yes
  • Design: City of El Paso

6. Mountain View Skate Park (“Diana Park”)

The Mountain View Skatepark encompasses 15,000 square feet. Skating after dark is safe in this well-lit area. A variety of terrain was available to local skaters when the park opened in 2003. The flow ranges from a large 10′ deep bowl to an open-ended section.

The custom concrete pitch is right beside Magoffin Middle School and has a 10-foot-deep triple pool, a big flow bowl, a wraparound street course, and lights. Funding for Grindline was $1 million from the Community Development Block Grant for this park.

Other features include winding transition, rad bowls, and some unique features such as vert step-up and curvy ledges.

Features of the park:

  • Clean and well maintained
  • 10-foot deep triple pool
  •  A large flow bowl
  • Ledges,

Restrictions:

None

Directions and Routes:

The park is straight north of Texas Health and Human Services. It will take you a 2-minute ride. The park will be on your left. // Skateparks In San Diego //

Basic Information

7. Northeast Regional Skatepark

A concrete skatepark, Northeast Regional Skatepark has something for everyone, whether you are a novice or a seasoned skater. It is highly recommended that you visit this 25,000-square-foot skatepark.

It’s a regional-sized park and was originally designed for events and competitions. California Skateparks built this as the first project from an initiative to establish quality-of-life bonds that began in 2012.

Among the features of the park are a full-fledged street plaza with all the rails, ledges, stairs, banks, hips, and a separate snake run.

Features of the park:

  • Obstacles include bank/wedge ramp
  • Bowl/pool, kink rail
  • grind box/ledge, pyramid, snake run
  • Cradle, Hubba, roll-in, corner
  • Quarterpipe, funbox, manual pad
  • London gap, kicker, handrail, flat rail, and mini ramp
  • The surface is concrete

Restrictions:

  • Park is unsupervised
  • Safety gears aren’t mandatory

Directions and Routes:

The park is a 7-minute drive from Patriot Family Dental to the northeast. But, you have to take a U-turn in Kenworthy Dr under Patriot Fwy. Then go straight through Gateway N Blvd. The park will be on your right. // Skate Parks In Philadelphia, PA //

Basic Information

8. Pollard Skate Ditch

Pollard skate ditch is an outdoor concrete ditch. It is located at Pollard Pond Park, Pollart Street, El Paso. It is open every day.

El Paso is well known for ditch skateparks. And this is another exciting addition to the list.

Features of the park:

  • Concrete surface
  • Ditch

Restrictions:

None

Directions and Routes:

Pollard St is near GAteway Blvd S. You can go there from Morningside Heights via Van Buren Ave and Dyer St. Take a left onto Porter Ave and right onto Pollard St. The skate ditch will be on your left. // Skateparks In Portland, Oregon //

Basic Information

  • Location: https://goo.gl/maps/yvvoBU795wXnz4vN8
  • Address:  2920 Pollard St, El Paso, TX 79930, United States
  • Skate Hours: Opens 24 hours
  • Type of skatepark: Outdoor
  • Riding Type: Skateboard, rollerblading
  • Cost fee: Free
  • Instructors: No
  • Size: Unavailable
  • Lights: No
  • Opened: 2016
  • Design/Build: Locals of El Paso, TX

9. Veteran’s Park Skatepark

Veteran‘s Park skatepark has a small area. At this outdoor park, Exerplay Inc. has installed Skatewave modular metal ramp equipment that is located on unused tennis courts in Northeast El Paso. It features a bank, funbox, and flat rail.

Features of the park:

  • Metal surface
  • Obstacles include Hubba, funbox, flat rail, and bank
  • Restrooms

Restrictions:

  • No pads required

Directions and Routes:

The Veteran’s park skatepark is a 9-minute drive from National Patrol Museum in Texas. You can get into the park toward the northeast via Woodrow Bean Transmountain Dr and Rushing Rd. Take Cockrell Ln, then Salem Dr. The park will be on your left inside the Veteran’s park. // Skateparks In Long Beach, CA //

Basic Information

10. Ysleta Skatepark

An important aspect of the Ysleta skatepark is that it is a small back-and-forth park constructed of concrete. An aspect of the Skatepark Project has contributed to the funding of this skatepark since 2005.

Features of the park:

  • Concrete surface
  • No pro shop
  • Obstacles include a deck, kicker/launch, quarterpipe, manual pad, flat rail, and ledge bank

Restrictions:

Directions and Routes:

The park is easy to get into from Mt Carmel Cemetry near S Zaragoza Rd. Go straight northeast through the road and the park will be on your left. // Skateparks In Sacramento, CA //

Basic Information

Bottom Line

All the skate parks in El Paso TX are unique in their ways. So it’s always a great idea to pay a visit to all these parks every once in a while. However, based on your location, you can always visit the closest one.

One thing to keep in mind is that many visitors have complained about antisocial activities that take place in some of the skate parks. So be cautious about your and your family’s safety before paying a visit.

What Are The Important Factors While Purchasing the Best Longboard Bearings?

01. Size

8 mm bearings are commonly used. This size is perfect for the longboard bearing. You can choose the other sizes if they give you more comfort. But I will recommend you choose the 8mm bearing.

02. Type

You can get both the ball bearing and roller bearing around you. Most of the bearings are ball bearings. Ball bearings run faster and more smoothly than roller bearings. But ball bearings can not handle the load. In that case, the roller bearing performs well.

03. Durability

The bearing should be durable that can last a minimum of one year. You can increase its durability by cleaning regularly and running in dry places. Water and mud decrease their longevity quickly.

04. Performance

The performance of the bearings is the most important fact. If your longboard bearings are rough and run with less spin that will not satisfy you. Also, a smooth and fast bearing with noise will annoy you. So, check before buying if there is any defect in performance.

05. Precision

Precision is the exactness or correctness of the tolerance. The American manufacturers association uses ABEC to define precision. When the precision increases, the permissible range decreases. Precision is independent of bearing clearance. The higher the ABEC number, the tighter the bearing will be. Higher precision helps to move more smoothly and increase efficiency.

06. Lubrication Compatibility

Lubrication is a must before riding on your longboard. To convert your slow bearings into fast longboard bearings you have to clean them regularly and lubricate them. It will give a fast spinning movement.

07. ABEC rating

While buying bearings, you need to check whether it is ABEC-rated longboard bearings or not. ABEC rating stands for dimension. It only rates tolerances. Some ABEC classes are 1, 3, 5, 7, 9, and 11. ABEC rating 9 is tighter than ABEC rating 1. The more the ABEC rating, the more the precision will be.

08. Engraved seals

Engraved seals prevent entering dust and other material inside. It also holds the lubricant inside and prevents friction. Most of the brands use rubber material for easy cleaning and to prevent the entry of water inside. While buying, check all the seals properly.

09. Price

Price is a big factor when buying anything. If you get a bearing with better quality at less price, then that will attract you the most. People mainly buy this type of bearings the most. Also, you should not follow the misconception that more expensive things mean better. Most of the famous brands are budget-friendly and careful about quality.

10. Brand reputation

While buying high-quality longboard bearings, people follow reputed brands. If the reputation is good then people do not hesitate to buy from the brand.

11. Warranty/Guarantee

If the brand provides you with a warranty or guarantee, that will be a plus point for you. You can repair the bearings if any problem arises at no cost within the given time. Also, the refund policy is beneficial for the buyers. You can change the defective set or can return the set with a full refund.

FAQs About Longboard Bearings

These are some commonly asked questions by people about the best bearings for longboards.

Is it worth it to invest in more expensive longboard bearings?

No, it is not worth it to invest in more expensive longboard bearings. More expensive is not equal to best quality. You can get a high-quality bearing within a suitable budget.

How do I know if my longboard bearings need to be replaced?

If the bearings start producing noise and are rough to run after cleaning, then you need to replace your longboard bearings. Also, the bearing will not spin if it is worn out.

What is the difference between ceramic and steel bearings for longboards?

The difference between ceramic and steel bearings for Longboards is durability. Ceramic bearings are more durable, smooth, and corrosion-resistant. At the same time, steel bearings are easily damaged by corrosive substances and are less durable than ceramic ones.

Can I lubricate my longboard bearings myself, or do I need to take them to a professional?

You can lubricate your longboard bearings yourself. )r if you have no previous experience, then you need to take them to a professional. But choose the right lubricant for the bearings.

Can I mix and match different brands of bearings on my longboard?

You should not mix and match different brands of bearings on your longboard as they are different from each other in size, shape, durability, and performance. Mixing different brands is unable to balance your movement.

Can I use the same bearings for both my longboard and my skateboard?

Yes, you can use the same bearing for both your longboard and your skateboard. The only difference appears in the case of wheel size. Otherwise, there is no difference between the bearings. But you should be careful about the dimension of the spacer.

Conclusion

Now it will be easy for you to choose the best Bearings for Longboards. You can compare the bearings and choose according to your comfort. I will recommend you choose the bearings which are performing well and have good customer service. If you still can not choose a perfect one then you can select it by brand reputation.

Also, choosing the brands which are giving warranty is the safest to pick. You can get these ten best bearings within an affordable range. Do not choose the bearings which are rated below ABEC 3. Below 3 ABEC-rated bearings have less tolerance.

About the author

This is Kyle Spinks from Butte MT, USA. A skateboarding expert and lover since 2019. skateupdates.com is my blog where I share my skateboarding life experience daily or weekly. If you're a beginner skater, I'll advise you to follow my blog daily.

Share 0
Tweet 0
Share 0
Leave a Reply

Your email address will not be published. Required fields are marked

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}
Success message!
Warning message!
Error message!