Home
/
Skateparks
/
Top 3 Best Skate Parks In Cincinnati, Ohio (All Details)

Top 3 Best Skate Parks In Cincinnati, Ohio (All Details)

Top 3 Best Skate Parks In Cincinnati, Ohio (All Details)

I’ve had the chance to visit Cincinnati, Ohio, many times. And, being a skating enthusiast, I was wonderstruck to see that Cincinnati has many top-notch skate parks that most US cities don’t have.

Thus, I must let other skating enthusiasts know (especially those living in Cincinnati) where these skate parks are located.

In essence, you will find 3 major skate parks in Cincinnati Ohio; the Warsaw Skate Park, the Lazarus Skating Pavillion, and the Shapes Park.

I will talk about the parks in detail with the necessary information to give you insight into the parks. Find more details about them below right now.

Details of 3 Skate Parks in Cincinnati, Ohio

1. Warsaw Skate Park

The Warsaw Federal Skatepark is a government-funded skate park in Cincinnati. It’s got a total area of 2380 square feet, and it has been open for public use since 2016.

Although the area of this park is not huge, it’s just about perfect for beginners who are trying to master skating.

However, this park might not be the best choice for practicing professional skating. It’s because the area is way too small for high-level stunts and speed skating.

But, among all other skate parks in Cincinnati, there’s something unique about this one. It’s got multiple basketball hoops and a soccer court for practicing basketball and soccer.

Features of the park

It’s got a blue-colored snake run and many red-colored concrete boxes as seating arrangements
There are multiple handrails scattered around this park.
It’s fully wheelchair accessible, and it’s also accessible from the highway beside it
The ground is made of pre-cast concrete. So, this park has got an extremely smooth surface

Restrictions

All General restrictions on public skateparks are applicable here. For example, smoking, drinking, and getting and abusing drugs are not allowed here
All skaters must be wearing protective equipment while skating on this ground
Children under 12 must have their legal guardians with them while practicing
Littering and throwing trash are forbidden here. Also, carrying food inside this park is discouraged by the federal body governing this park

Directions and Routes

You can easily commute to this skate park by the Ohio River Scenic Byway. From this road, you have to enter Evans Street, and you will be able to find this skate park on the right-hand side of the road.

Basic Information

Location: https://maps.app.goo.gl/DFpxvVu8iGkgULrn7
Address: 631-635 Evans St, Cincinnati, OH 45204, United States
Email: not available
Telephone: (513) 977-5661
Riding Type: Skateboards, scooters, rollerskate, and some other non-motorized rides
Skate Hours: from 6 am to 10:00 pm
Cost fee: free of cost
Instructors: no
Number of participants: up to 30 at a time
Size: 2380 square feet
Lights: Yes
Opened: In 2016
Design: American Ramp Company
Type of skatepark: Outdoor Pre-cast concrete pump tracks

2. Shapes Park, Cincinnati

The Shapes Skate Park is one of the popular skateparks in Cincinnati, Ohio. It is a tiny skate park that offers nice arrangements for resting, sitting, picnics, and sports.

The Shapes Skate Park

Although this park is small in size, it’s a nice place for jogging, skating, bicycling, etc. Plus, its skating structures are very colorful and amusing to behold. So, children and adults alike love to visit this place for refreshment.

The only con of this skate Park in Cincinnati is that its ground is not fully smooth. Its concrete ground finishing is not top-notch. However, It’s fully suited for skateboarding and roller skating.

Features of the park

The park has got blue and red colored skating blocks and elevated steps
Multiple concrete blocks are there as seating arrangements
This skatepark is fully wheelchair accessible, and it’s also accessible by bikes
It’s got wavy stairs and elevated stages for skating stunts

Restrictions

Like all other public skate parks in Cincinnati, it’s forbidden to bring drugs here. Plus, smoking and drinking are also prohibited in this park
Littering is illegal
All kids must be wearing safety knee pads, certified helmets, and slide gloves while skating, skateboarding, rollerblading, and biking
It’s forbidden to carry glass objects in this park. It’s because glass shreds from broken glass objects can cause severe accidents

Directions and Routes

You can get to this park by either taking Central Ave or Elm St. Either way; you’ll have to take W 5th St to reach this park. Then, you’ll find this park around the corner of Home STREET.

Basic Information

Location: https://maps.app.goo.gl/pbERuFGA9WK8ASm66
Address: 249 US-27, Cincinnati, OH 45202, United States
Email: not available
Telephone: (513) 977-5661
Riding Type: Skateboards, roller skates, and roller blades
Skate Hours: from 7:00 a.m. to 9:00 p.m.
Cost fee: free of cost
Instructors: not available
Number of participants: up to 15 at a time
Size: approximately 1,500 ft²
Lights: Yes
opened: 2010
Design: Ricky Dennis
Type of skatepark: Outdoor small-scale skate park

3. Lazarus Skating Pavillion

In case you’re looking for an open ground for speed skating, you should visit the Lazarus Skating Pavillion. It’s a skatepark with a ground of asphalt and concrete. So, it’s perfect for professional-level skating practices.

Lazarus Skating Pavillion

Plus, you’ll also find shaded areas and restrooms here. So, if you want to take a break and rest for a while, you can perfectly do so in this park.

As this park is fully wheelchair accessible, it’s a suitable sporting ground for disabled people as well. Additionally, the grass area in this park can be used for family picnics. So, it’s safe to say that this park is universally suited for everyone.

Features of the park

The park has long stairs and handrails for skating practice
The plain ground is wide open for all sorts of skating stunts and maneuvers
A public restroom and shaded spots are there for resting and freshening up
The ground of this park has three types of characteristics; It’s concrete, grassy, and asphalt
Thus, this park is fully suited for biking, jogging, skateboarding, and rollerblading

Restrictions

Littering and throwing trash in this park is fully forbidden
Drugs, alcohol, and smoking are prohibited within this spark
Children under 12 must have their legal guardian present when practicing skating in this park

Directions and Routes

This park is right beside the Ohio river. So, you can easily reach the park by taking the Riverside Dr. If you drive through Riverside Dr., you will find this park beside the Tm Berry International Friendship Park.

Basic Information

Location: https://maps.app.goo.gl/WSHWwhrqjW5Up4pK9
Address: 925 Riverside Dr, Cincinnati, OH 45202, United States
Email: not available
Telephone: (513) 977-5661
Riding Type: Skateboards, roller skates, rollerblades, and all non-motorized vehicles
Skate Hours: 6:00 a.m. to 11:00 p.m.
Cost fee: entirely free of cost
Instructors: not available
Number of participants: up to 50 at a time
Size: 6500 square feet
Lights: Yes
opened: since 2006
Design: Unknown
Type of skatepark: Outdoor recreational skating park

Conclusion

As you can see, the skateparks in Cincinnati, Ohio, are fully suitable for skaters of all ages and experience levels.

So, next time you visit Cincinnati, don’t forget to taste skating in these parks. Make sure you take all necessary safety measures before skating there.

What Are The Important Factors While Purchasing the Best Longboard Bearings?

01. Size

8 mm bearings are commonly used. This size is perfect for the longboard bearing. You can choose the other sizes if they give you more comfort. But I will recommend you choose the 8mm bearing.

02. Type

You can get both the ball bearing and roller bearing around you. Most of the bearings are ball bearings. Ball bearings run faster and more smoothly than roller bearings. But ball bearings can not handle the load. In that case, the roller bearing performs well.

03. Durability

The bearing should be durable that can last a minimum of one year. You can increase its durability by cleaning regularly and running in dry places. Water and mud decrease their longevity quickly.

04. Performance

The performance of the bearings is the most important fact. If your longboard bearings are rough and run with less spin that will not satisfy you. Also, a smooth and fast bearing with noise will annoy you. So, check before buying if there is any defect in performance.

05. Precision

Precision is the exactness or correctness of the tolerance. The American manufacturers association uses ABEC to define precision. When the precision increases, the permissible range decreases. Precision is independent of bearing clearance. The higher the ABEC number, the tighter the bearing will be. Higher precision helps to move more smoothly and increase efficiency.

06. Lubrication Compatibility

Lubrication is a must before riding on your longboard. To convert your slow bearings into fast longboard bearings you have to clean them regularly and lubricate them. It will give a fast spinning movement.

07. ABEC rating

While buying bearings, you need to check whether it is ABEC-rated longboard bearings or not. ABEC rating stands for dimension. It only rates tolerances. Some ABEC classes are 1, 3, 5, 7, 9, and 11. ABEC rating 9 is tighter than ABEC rating 1. The more the ABEC rating, the more the precision will be.

08. Engraved seals

Engraved seals prevent entering dust and other material inside. It also holds the lubricant inside and prevents friction. Most of the brands use rubber material for easy cleaning and to prevent the entry of water inside. While buying, check all the seals properly.

09. Price

Price is a big factor when buying anything. If you get a bearing with better quality at less price, then that will attract you the most. People mainly buy this type of bearings the most. Also, you should not follow the misconception that more expensive things mean better. Most of the famous brands are budget-friendly and careful about quality.

10. Brand reputation

While buying high-quality longboard bearings, people follow reputed brands. If the reputation is good then people do not hesitate to buy from the brand.

11. Warranty/Guarantee

If the brand provides you with a warranty or guarantee, that will be a plus point for you. You can repair the bearings if any problem arises at no cost within the given time. Also, the refund policy is beneficial for the buyers. You can change the defective set or can return the set with a full refund.

FAQs About Longboard Bearings

These are some commonly asked questions by people about the best bearings for longboards.

Is it worth it to invest in more expensive longboard bearings?

No, it is not worth it to invest in more expensive longboard bearings. More expensive is not equal to best quality. You can get a high-quality bearing within a suitable budget.

How do I know if my longboard bearings need to be replaced?

If the bearings start producing noise and are rough to run after cleaning, then you need to replace your longboard bearings. Also, the bearing will not spin if it is worn out.

What is the difference between ceramic and steel bearings for longboards?

The difference between ceramic and steel bearings for Longboards is durability. Ceramic bearings are more durable, smooth, and corrosion-resistant. At the same time, steel bearings are easily damaged by corrosive substances and are less durable than ceramic ones.

Can I lubricate my longboard bearings myself, or do I need to take them to a professional?

You can lubricate your longboard bearings yourself. )r if you have no previous experience, then you need to take them to a professional. But choose the right lubricant for the bearings.

Can I mix and match different brands of bearings on my longboard?

You should not mix and match different brands of bearings on your longboard as they are different from each other in size, shape, durability, and performance. Mixing different brands is unable to balance your movement.

Can I use the same bearings for both my longboard and my skateboard?

Yes, you can use the same bearing for both your longboard and your skateboard. The only difference appears in the case of wheel size. Otherwise, there is no difference between the bearings. But you should be careful about the dimension of the spacer.

Conclusion

Now it will be easy for you to choose the best Bearings for Longboards. You can compare the bearings and choose according to your comfort. I will recommend you choose the bearings which are performing well and have good customer service. If you still can not choose a perfect one then you can select it by brand reputation.

Also, choosing the brands which are giving warranty is the safest to pick. You can get these ten best bearings within an affordable range. Do not choose the bearings which are rated below ABEC 3. Below 3 ABEC-rated bearings have less tolerance.

About the author

This is Kyle Spinks from Butte MT, USA. A skateboarding expert and lover since 2019. skateupdates.com is my blog where I share my skateboarding life experience daily or weekly. If you're a beginner skater, I'll advise you to follow my blog daily.

Leave a Reply

Success message!

Warning message!

Error message!